Panasonic AV-HS60C3G, Руководство по эксплуатации

Страница: 75 / 176

– 75 –
Chapter 5 Basic Operations — Color corrector
[Blue] [Red] [Green]
1: [Tone1 Black]
2: [Tone2 Gray L]
3: [Tone3 Gray H]
4: [Tone4 White]
1
Select the <CC> button
→
[SDI IN 1] to [SDI IN 20]
→
the tab to be set.
f
Select the tab corresponding to the terminal for which you want to set the color corrector.
2
Set [Red], [Green], and [Blue] in the [Tone1 Black]/[Tone2 Gray L]/[Tone3 Gray H]/[Tone4 White] column.
[Tone1 Black] Adjusts the black level.
[Tone2 Gray L] Adjusts the gray Low level.
[Tone3 Gray H] Adjusts the gray High level.
[Tone4 White] Adjusts the white level.
3
Select an item in [RGB Link] in the [Tone1 Black] column.
[OFF] Enables setting of the [Tone1 Black]/[Tone2 Gray L]/[Tone3 Gray H]/[Tone4 White] column independently from RGB.
[ON]
Uses the value of [Red] as the values of [Green] and [Blue] for the [Tone1 Black]/[Tone2 Gray L]/[Tone3 Gray H]/[Tone4
White] column.
@ @ NOTE
t
The unit simply connects the set black level, gray Low level, gray High level, and white level to create a tone curve. Depending on the setting values,
the tone curve might not be as desired.
Adjusting the gain of color matrix
1
Select the <CC> button
→
[SDI IN 1] to [SDI IN 20]
→
the tab to be set.
f
Select the tab corresponding to the terminal for which you want to set the color corrector.
2
Set [R-G], [R-B], [G-R], [G-B], [B-R], and [B-G] in the [Matrix R/G]/[Matrix B] column.
[R-G] Sets the gain value in the R-G axis direction.
[R-B] Sets the gain value in the R-B axis direction.
[G-R] Sets the gain value in the G-R axis direction.
[G-B] Sets the gain value in the G-B axis direction.
[B-R] Sets the gain value in the B-R axis direction.
[B-G] Sets the gain value in the B-G axis direction.