Panasonic AV-HS60C3G, Руководство по эксплуатации

Страница: 68 / 176

– 68 –
Chapter 5 Basic Operations — KEY
2
Adjust the color.
f
Set the [Hue], [Sat], [Lum], or [Color Palette] in [Border Color] in the R menu.
Setting the trimming
Set the trimming type and values as well as operation for when manual is set. The default setting is as shown in the following figure.
PinP effective area
Area trimmed
Original size of PinP
[Right] [Left]
[Top]
[Bottom]
[50]
[40]
[0]
[ − 40]
[ − 50]
[ − 50] [0] [50]
[ − 40] [40]
1
Select the <ME1>/<ME2> button → [PinP1], [PinP2] → [Resizer] tab.
2
Select an item in [Preset] in the [Trim(Square)] column.
[Trim] Trimming is performed.
[Pair]
Changes the settings in such a way that the [Left] and [Right] trimming amounts, and the [Top] and [Bottom] trimming
amounts are the same. (This makes for a top-bottom and left-right symmetry.)
[Manual]
Trims using the values set with [Trim Adjust1] and [Trim Adjust2].
3
Set the [Left], [Top], [Right], or [Bottom] in [Trim] in the R menu.
f
Set the trimming value. The [Left] setting cannot exceed the [Right] setting (and vice versa), and the [Top] setting cannot exceed the [Bottom]
setting (and vice versa).
[Left] Sets the left trimming value.
[Top] Sets the top trimming value.
[Right] Sets the right trimming value.
[Bottom] Sets the bottom trimming value.
4
Set [WipeAspect] in the [Trim] column.
f
The aspect ration of the wipe pattern is changed when anything other than [Off] is selected in [WipeMask] in the [Mode] column.
Setting the priority
Set the priority (image positioning). The default setting is as shown in the following figure.
Background image
[Key2], [PinP2]: [1st]
[Key1], [PinP1]: [2nd]
1
Select the <ME1>/<ME2> button → [MISC] → [Key Priority] tab.
2
Select an item in [Key1], [Key2], [PinP1], [PinP2] in the [Key Priority] column.
f
Select the priority for any key from [1st], [2nd].
f
Changing the setting of one item will change the settings of other items accordingly. In the default setting, if [Key1], [PinP1] is changed from [2nd]
to [1st], then the settings of [Key2], [PinP2] also change as follows.
- [Key2], [PinP2]: [1st]
→ [2nd]
Setting [Key Link]
Combine [Key1], [Key2], [PinP1], [PinP2] in the same ME to start transitions simultaneously.
1
Select the <ME1>/<ME2> button
→
[MISC]
→
[Key Link] tab.
2
Select an item in [Key1], [Key2], [PinP1], [PinP2] in the [Key On Link] column.
f
Select [Off], [Group1] or [Group2] for any key.
Keys that were set in the same group operate in conjunction.
Example) When [Key1], [PinP1] is set to [Group1], and [Key2], [PinP2] is set to [Off]
Pressing the <KEY1 TRNS> button starts transitions of [Key1], [PinP1] and [Key2], [PinP2] at the same time.