Panasonic AV-HS60C3G, Руководство по эксплуатации

Страница: 61 / 176

– 61 –
Chapter 5 Basic Operations — KEY
r
Wipe pattern screens for key transition
Setting the Multi Pattern effect
The wipe pattern can be divided to the specified number.
f
Enabled when the following pattern waveform is selected.
- WIPE
1
Select the <ME1>/<ME2> button
→
[KEY1], [KEY2]
→
[Key Setting] tab.
2
Set the specification method of the number of division in [H/V Sync] of the [Multi] column.
[ON] Makes the number of division the same in horizontal and vertical directions.
[OFF] Different number of division can be specified for horizontal and vertical directions.
3
Set the number of division in horizontal and vertical direction in [H] and [V] of the [Multi] column.
Setting the Modulation effect
An effect to ripple the wipe edge can be added.
f
Enabled when the following pattern waveforms are selected.
- WIPE
- SQ: 42, 43, 44, 45
1
Select the <ME1>/<ME2> button
→
[KEY1], [KEY2]
→
[Key Setting] tab.
2
Select [H Modulation] and [V Modulation] in the R menu, and set [Amplitude], [Frequency], and [Speed] in the encoder menu.
[Amplitude] Sets the amplitude of the wave.
[Frequency] Sets the frequency of the wave.
[Speed] Sets the speed of the wave movement.
3
Select an item in [H Pattern], [V Pattern] in the [Modulation] column.
[Sine] Selects sine waves.
[Delta] Selects delta wave.
Adjusting the luminance key/linear key
Adjust the luminance key and linear key definition.
1
Select the <ME1>/<ME2> button → [KEY1], [KEY2] → [Key Setting] tab.
2
Select [Key Adjust] in the R menu, and set [Clip], [Gain], and [Density] in the encoder menu.
[Clip] Sets the reference level for creating key signals.
[Gain] Sets the key amplitude.
[Density] Sets the key density.
3
Select an item in [Key Invert].
[OFF] Does not invert the key signals generated internally.
[ON] Inverts the key signals generated internally.