Panasonic AV-HS60C3G, Руководство по эксплуатации

Страница: 49 / 176

– 49 –
Chapter 4 Preparations — Various settings
Disabling button/block operations
Operations can be disabled for each button or block.
f
For details, refer to “Disabling button operations”.
1
Select the <PANEL> button → [BUTTON INHIBIT] → [Panel1]/[Panel2]/[Panel3] tab, and make the following settings.
[Panel1] tab Assigns the control panel 1.
[Panel2] tab Assigns the control panel 2 (second Control Panel).
[Panel3] tab Assigns the control panel 3 (third Control Panel).
Setting button colors
For details on the button color settings, refer to “Setting the button color”.
Setting output signals
Make various settings for SDI output signals.
f
For details, refer to “Setting output signals”.
1
Select the <IN OUT> button
→
[OUT ASSIGN]
→
[Assign] tab, and make the following settings.
[Assign] tab Assigns output matrix.
2
Select the <CC> button → [C/C OUT 1-6] to [C/C OUT 7-12] → select the tab you want to set, and then set the color collector.
f
Make the settings for color correctors built into the <C/C OUT 1> to <C/C OUT 12> terminals.
f
Refer to “Setting the ME output and DSK output” for details about advanced settings for the output from the ME/DSK block.
Setting MultiView displays
If the output signal is set to MV1, MV2, multiple images can be simultaneously displayed on a maximum of 16 split screens.
f
For details, refer to “Setting MultiView displays”.
1
Select the <MV> button → [MV1-2] → [MV1], [MV2] tabs.
2
In the [Pattern] column, make the settings for the split pattern of the MultiView display.
f
When [Assign] is selected, the source settings screen will be displayed on a sub-screen.
3
In the [MV Frame]/[Tally Box]/[Tally Label L]/[Tally Label R]/[Display] column, set the information displayed on the sub-screen.
Setting a tally
Setting reference outputs
For details on the tally group settings, refer to “Setting a tally”.
1
Select the <SYS> button
→
[PERIPHERAL]
→
[Tally] tab.
2
Select the items in [Target A], [ + Target B], [ + Target C], [ + Target D], [ + Target E], [ + Target F], [ + Target G], and [ + Target H] in the [Tally
Group1 (On-Air)] column.
f
Select up to eight reference outputs to be used for the on-air tally.
3
Select the items in [Target A], [ + Target B], [ + Target C], [ + Target D], [ + Target E], [ + Target F], [ + Target G], and [ + Target H] in the [Tally
Group2] to [Tally Group4] column.
f
Aside from [Tally Group1 (On-Air)], additional three tally groups can be set. When [Color] is selected, colors to be used for the tally in the MultiView
display can also be set.
Setting date and time
Set the date and time to be used as a timestamp when saving files to the memory card or the Storage Module. It can also be displayed on the split
screen of the MultiView display.
1
Select the <SYS> button → [MAINTENANCE] → [Misc] tab.
2
Set the date and time in the [Date]/[Time] columns.
[Date] column Sets the year, month, and date in [Year], [Month], and [Date].
[Time] column
Sets the hour, minute, and second in [Hour], [Minute], and [Second].
3
Select [Set] in the [Date]/[Time] column.