Panasonic AV-HS60C3G, Руководство по эксплуатации

Страница: 45 / 176

– 45 –
Chapter 4 Preparations — Menu delegation function
Menu delegation function
When a button on the Control Panel is double-clicked, the menu screen displayed on the Menu Panel or the multi-selection panel area can be switched.
At the same time, the normal operation activated when the button is pressed is also executed.
Enabling/disabling the menu delegation function
Enable/disable the menu delegation function at the Menu Panel and the multi-selection panel area separately.
1
Select the <PANEL> button
→
[OTHER SETTINGS]
→
[Panel1]/[Panel2]/[Panel3] tab.
2
Select an item in [MenuPanel] or [Select Panel] in the [Delegation] column.
[OFF] Enables the menu delegation function.
[ON] Disables the menu delegation function.
Menu delegation function list
Button
Transition menu of the Menu Panel
Transition menu of the multi-
selection panel area
Button position Operation target button
Crosspoint area
<CBGD1>*
1
, <CBGD2>*
1
The <CBGD> button on the top menu → [CBGD] → [CBGD]
tab
―
<STILL1 V/K>, <STILL2 V/K>*
1
The <MEM> button on the top menu → [STILL] → [Still] tab
Selection of the register memories
([STILL1], [STILL2])
<CLIP1 V/K>, <CLIP2 V/K>*
1
The <MEM> button on the top menu → [CLIP] → [Play Clip]
tab
Selection of the register memories
([CLIP1], [CLIP2])
Transition area
<WIPE>
The <ME1>/<ME2> button on the top menu
→
[BKGD]
→
[Border/Trim] tab
―
<EMEM LINK>
The <MEM> button on the top menu → [EVENT MEMORY] →
[Register] tab
Select the registered memory of the
event memory
<MCRO ATCH>
The <MEM> button on the top menu → [MACRO] → [Macro
Attach] screen
―
<PATT LIMIT>
The <ME1>/<ME2> button on the top menu → [BKGD] →
[Transition] tab
―
<AUTO>
The <ME1>/<ME2> button on the top menu
→
[BKGD]
→
[Transition] tab
―
KEY operation area <KEY1>, <KEY2>, <PinP1>,
<PinP2>*
2
f
When the key type is [Lum]/[Linear]/[Full]
The <ME1>/<ME2> button on the top menu
→ [KEY1],
[KEY2]
→
[Key Setting] tab
f
When the key type is [Chroma]
The <ME1>/<ME2> button on the top menu
→ [KEY1],
[KEY2]
→
[Chroma] tab
f
When Resizer is enabled
The <ME1>/<ME2> button on the top menu
→
[KEY1],
[KEY2] → [Resizer] tab
―
DSK operation area <DSK1>, <DSK2>*
2
The <DSK> button on the top menu → [DSK1], [DSK2] →
[Setting] tab
―
*1 Can be used when assigned to the PGM/A bus crosspoint buttons or PST/B bus crosspoint buttons.
*2 These are linked with the selection of the selection buttons that are the target of operation in the KEY/DSK operation section (<KEY1>/<KEY2>/<PinP1>/<Pin
P2>/<DSK1>/<DSK2>), and you can select the bus assign buttons (<1> - <6>) that have the relevant KEY buses assigned.
You can make the following linking settings by selecting top menu <PANEL> button
→ [OTHER SETTINGS] → [Panel1]/[Panel2]/[Panel3] tab → [Delegation]
column → [Bus Assign].
[OFF] There is no link with the operation of the bus assign buttons.
[ON] Linked with the operation of the bus assign buttons.