Panasonic AV-HS6000, Руководство по эксплуатации

Страница: 27 / 206

– 27 –
Chapter 3 Part Names and Functions — Control Panel AV‑HS60C1/AV‑HS60C2/AV‑HS60C4
4 Z‑axis dial
Used to set the numeric values at the numeric entry items on the Menu Panel AV-HS60C3.
It corresponds to the third from the left of the rotary encoders on the Menu Panel AV-HS60C3.
5 Positioner
Used to set the numeric values at the numeric entry items on the Menu Panel AV-HS60C3.
f
X axis (horizontal direction): Corresponds to the leftmost of the rotary encoders on the Menu Panel AV-HS60C3.
f
Y axis (vertical direction): Corresponds to the second from the left of the rotary encoders on the Menu Panel AV-HS60C3.
6 <FINE> button
Changes the amount of change in parameter for the positioner operation.
When set to on, finer adjustments can be made.
7 <ENBL> button
Lit: Enables operations of the positioner and Z-axis dial.
Off: Disables operations of the positioner and Z-axis dial.
@ @ NOTE
t
This unit detects the position of the positioner and sets the position to the center by the time when the startup is completed after power is turned on.
Do not touch the positioner until the startup of the unit is completed.
r
Memory cards
Memory cards used with the unit should conform to SD or SDHC standards.
Be sure to format memory cards using the unit.
Memory cards with the following capacity can be used for the unit. The unit does not support SDXC memory cards.
SD memory card: 8 MB to 2 GB
SDHC memory card: 4 GB to 32 GB
For the latest information not available in the Operating Guide, visit the following website.
http://pro-av.panasonic.net/ (English only)
f
Keep the following points in mind when using or storing memory cards.
-
Avoid high temperatures/humidities.
-
Do not expose to water droplets.
-
Avoid electrical charges.
Front panel
r
AV‑HS60C1/AV‑HS60C2
2 3 2 3 1 1
Power supply 1
Power supply 2
r
AV‑HS60C4
2 3 2 3 1 1
Power supply 1
Power supply 2
1 <POWER> switch (with safety guard)
Turns power on/off.
f
The single power supply model (AV-HS60C1) does not have the <POWER> switch for the power supply 2.
f
When turning off the power of the redundant power supply model (AV-HS60C2 /AV-HS60C4), set both the <POWER> switch for the power supply
1 and the <POWER> switch for the power supply 2 to <OFF>.
2 Power indicator
When power is input into the <AC IN 1>/<AC IN 2> terminal, both <POWER> switches of the power supply 1 and the power supply 2 will light up
when they are set to <ON>.
f
AV-HS60C1 does not have the power indicator for the power supply 2.