Panasonic AMK3000P22, Руководство по установке

Страница: 57 / 60

56
No. Function name
Changes
during RUN
Setting range Unit
Initial
value
P356 Sleep Operation
Delay Time
○
0.0 to 25.0 0.1[sec] 0.0
P357
Speed Search
Selection during
Startup
○
0: Invalid
1: Valid
－
0
P359
Standby Time for
Speed Search
○
0.0 to 100.0 0.1[sec] 0.5
P360
Recover Time for
Speed Search
Voltage
○
0.0 to 10.0 0.1[sec] 0.5
P361
Speed Search
Selection during
Retry
○
0: Invalid
1: Valid
－
0
P362
Speed Search Retry
Selection
○
0: Stop by error
1: Operation with starting frequency
－ 0
P363
Speed Search Retry
Times
○
0 to 10 1[times] 0
P364
Upper Frequency
Limit Selection for
Speed Search
○
0: Lower than the maximum frequency
1: Lower than the previous frequency
before operation coasts to stop.
－
0
*1) When a fault trip occurs, reset cannot be made with stop signal input from external
devices.
Therefore, use STOP SW on the panel to reset the fault trip.
But if the reset lock function is used, it will take precedence. In addition, reset
fuction is also valid.
*2) When the set value displayed with "r", it indicates the contact b output.
(If "r" is not displayed, it indicates contact a output. )
*3) When the set value displayed with "r", ON indicates non-exciting operation.
(If "r" is not displayed, ON indicates exciting operation. )
*4) Initial value varies with inverter capacity.
*5) Initial value varies with applicable input voltage of inverter.
It is 200 for 200 V voltage and 380 for 400 V voltage.
P057: It is 275.0 for 200 V voltage and 550.0 for 400 V voltage.
P205, P218: It is 200 for 200 V voltage and 380 for 400 V voltage.
*6) It is valid during power OFF. (The changed parameter value is valid when the
power is turned ON from OFF.)
*7) The change from manual torque boost to auto torque boost or vice versa cannot be
made during operation.
* 8) For 5.5kW to 15kW, the setting range is 0.000 to 65.00, the setting unit is 0.001[
Ω
],
please pay attention to the setting and response of communication function.
* 9) When the setting range is 0.04 to 99.99, the setting unit is 0.01; when the setting
range is 100.0 or above, the setting unit is 0.1; when the setting range is 1000 or
above, the setting unit is 1.