– 66 –
Chapter 4 Menu Operations — Menu list
Item
Description of settings
[HD-SDI2 OUTPUT ITEM]
Selects details of the characters superimposed on images output from the <HD SDI2> terminal.
[MENU ONLY]:
Displays only on the menu.
[STATUS]:
Displays all characters that are the same as in the viewfinder display.
f
Factory setting: [MENU ONLY]
[HD-SDI2 CHAR]
Sets whether to superimpose characters on images output from the <HD SDI2> terminal.
[OFF], [ON]
f
Factory setting: [OFF]
[HD-SDI2 CHAR SIZE]
Selects the size of the characters superimposed on images output from the <HD SDI2> terminal.
[LARGE], [SMALL]
f
Factory setting: [SMALL]
[HD-SDI2 POWER]
Enables/disables the power supply of the <HD SDI2> terminal.
[ACTIVE], [SAVE]
f
Factory setting: [ACTIVE]
[AUX I/O]
Configures the video output from the <AUX> terminal.
[PMT2 OUT], [HD TRUNK]
f
Factory setting: [PMT2 OUT]
[VF OUT]
Configures the video output from the <VF> terminal.
[Y/C], [R], [G], [B], [NAM]
f
Factory setting: [ENC]
[TRUNK1]
Sets the serial interface standard of the <TRUNK> terminal.
[RS422], [RS232C]
f
Factory setting: [RS422]
[TRUNK2]
Sets the serial interface standard of the <TRUNK> terminal.
[RS422], [RS232C]
f
Factory setting: [RS422]
[BACK LIGHT]
Sets the brightness of the backlight.
[1]…[70]
f
Factory setting: [20]
[LAN]
Sets the usage for the <LAN> terminal.
[TRUNK], [PC]
f
Factory setting: [PC]
[B/U LENS]
Sets the lens type of the Build-up Unit.
[PORTABLE], [BOX]
f
Factory setting: [BOX]
[T-BAR CONNECT]
Sets whether to connect the T-BAR unit.
[OFF], [ON]
f
Factory setting: [OFF]
[LENS I/F]
Sets the lens interface.
[ANALOG], [SERIAL]
f
Factory setting: [SERIAL]
[DISPLAY STATUS/BAR
OSD]
[CAM ID CHARACTER]
Sets the camera name.
[GEN-LOCK]
[H PHASE-COARSE]
Roughly adjusts the phase of horizontal synchronization.
[
−
5]…[
+
5]
f
Factory setting: [0]
[H PHASE-FINE]
Finely adjusts the phase of horizontal synchronization.
[
−
100]…[
+
100]
f
Factory setting: [0]
[AUTO SET UP]
Item
Description of settings
[FILTER]
Sets the ND/CC filter mode for automatic setup.
[REF], [CURRENT]
f
Factory setting: [REF]
[SETUP MODE]
Sets the mode for automatic setup.
[FULL], [EASY]
f
Factory setting: [FULL]
[REFERENCE FILE]
Sets the reference file for automatic setup.
[FACTORY], [USER1], [USER2], [USER3]
f
Factory setting: [FACTORY]
[MASTER PEDESTAL TARGET]
Sets the master pedestal for automatic setup.
[0.0%]…[7.5%]
f
Factory setting: [3.0%]
[AUTO SET UP EXECUTE]
Selects whether to execute with the configured settings.
[NO], [YES]
[NETWORK SETUP]
[NETWORK SETUP] cannot be selected right after the power is turned on, because boot of the camera is in progress.
This is not an error. Perform operation after a while.
Содержание AK-UC3000GS
Страница 9: ...Before using the camera read this chapter Chapter 1 Overview ...
Страница 72: ...This chapter describes how to configure the settings from a computer Chapter 5 Web Screen ...
Страница 92: ...This chapter describes the warning displays and after sales services of the camera Chapter 6 Maintenance ...
Страница 100: ...This chapter describes the specifications of this product Chapter 7 Specifications ...