12
Installation
t
Securely install the safety wire, etc., separately following the operating instructions of the manufacturer
when installing the commercially available mounting fixture.
t
Do not reuse the wire that was used (dropped) once. Always use a new wire when reinstalling.
t
Take caution to install so the rating plate is visible.
Example where the camera is mounted on a ceiling
e
a
b
c
f
g
h
i
j
k
l
m
n
o
d
When using the inch screws (1/4-20
UNC)
When using the inch screws (3/8-16
UNC)
Always attach with an anchor bolt.
a: Flange nut (supplied)
b: Screw hole
Drill a hole of 5 mm diameter.
c: Wire mounting screw (supplied) (screw: M4)
Purchase a commercially available M4 screw separately when the length of the screw is not enough.
d: Air intake hole
Take caution not to block the air intake hole when installing the fixture.
e: Wire mounting screw (supplied) (screw: M4)
f: Drop prevention wire (optional)
g:
Camera mounting fixture (procured locally)
