Panasonic AK-SHB800G, Руководство по эксплуатации, Страница: 69 / 92

– 69 –
Chapter 4 Menu Operations — Menu list (AK-SHU800)
[NETWORK SETUP]
[NETWORK SETUP] cannot be selected immediately after turning on the power or after switching [FREQUENCY] between 59.94 and 50 because the
unit is starting up.
This is not an error. Perform operation after a while.
Item Description of settings
[
LAN PROPERTY
] [
IP ADDRESS
] Sets the IP address.
f
Factory setting: [192.168.0.30]
[SUBNET MASK] Sets the subnet mask.
f
Factory setting: [255.255.255.0]
[
DEFAULT GATEWAY
] Sets the default gateway.
f
Factory setting: [192.168.0.1]
[
ROI PORT
] Sets the port number when connecting to ROI. The setting is updated when the power is restarted.
[49352], [49400]…[49499]
f
Factory setting: [49352]
[ ROP PORT ] Sets the port number when connecting to ROP. The setting is updated when the power is restarted.
[49152], [49200]…[49299]
f
Factory setting: [49152]
[
SET EXECUTE
] Selects whether to execute with the configured settings.
[NO], [YES]
f
Factory setting: [NO]
[
MAC ADDRESS
] Displays the MAC address. (This cannot be changed.)
[
USER ACCOUNT
] [
LIST
] Displays the list of the registered users.
[FILE]
[SD CARD]
[SD CARD] cannot be selected right after the power is turned on, because boot of the camera is in progress. This is not an error. Perform operation after
a while.
@ @ NOTE
t
Memory cards used with the unit should conform to SD, SDHC or SDXC standards.
Item Description of settings
[MODE] Selects the operation mode.
[FORMAT], [LOAD], [STORE]
f
Factory setting: [LOAD]
[FILE SEL] Selects a file.
[SCENE], [USER], [LENS], [ACCOUNT]
f
Factory setting: [SCENE]
[FILE NO.] Selects a file number.
SCENE file: [CURRENT], [1]…[8]
USER file: [1]…[3]
LENS file: [1]…[32]
ACCOUNT file: [1]
f
Factory setting: [1]
[FILE NAME] Enters a file name. (15 characters or less)
f
Factory setting: [SCENE1]
[SD FILE NO.] Selects the file number of the SD memory card.
[1]…[100]
f
Factory setting: [1]
[EXECUTE] Selects whether to execute with the configured settings.
[NO], [YES]
f
Factory setting: [NO]