Panasonic AK-HC5000, Руководство по эксплуатации, Страница: 55 / 109

– 55 –
Chapter 4 Menu Operations — Menu list
Item Description of settings
[MIC2 AMP] Adjusts the level of the input to the <MIC 2> terminal.
[ − 20dB]…[ + 20dB]
f
Factory setting: [0dB]
[MIC2 INPUT SELECT] Sets the input signal for the <MIC 2> terminal.
This item can be set only when the PGM option is used.
[FRONT MIC], [OFF]
f
Factory setting: [OFF]
[FRONT MIC POWER] Enables/disables the phantom power (48 V) for the external microphone connected to the <MIC> terminal
(front).
[ON], [OFF]
f
Factory setting: [OFF]
[PAINT]
[PAINT SWITCH]
Item Description of settings
[BLACK SHADING] Enables/disables the black shading (saw-toothed waveform or parabolic waveform).
[OFF], [ON]
f
Factory setting: [ON]
[WHITE SHADING] Enables/disables the white shading (saw-toothed waveform or parabolic waveform).
[OFF], [ON]
f
Factory setting: [ON]
[FLARE] Enables/disables flare.
[OFF], [ON]
f
Factory setting: [ON]
[GAMMA] Enables/disables gamma.
[OFF], [ON]
f
Factory setting: [ON]
[BLACK GAMMA] Enables/disables black gamma.
[OFF], [ON]
f
Factory setting: [OFF]
[KNEE] Enables/disables knee.
[OFF], [ON]
f
Factory setting: [ON]
[WHITE CLIP] Enables/disables white clips.
[OFF], [ON]
f
Factory setting: [ON]
[DRS SW] Enables/disables dynamic range stretcher.
[OFF], [ON]
f
Factory setting: [OFF]
[DETAIL] Enables/disables the detail.
[OFF], [ON]
f
Factory setting: [ON]
[SKIN TONE DETAIL] Enables/disables the skin tone detail.
[OFF], [ON]
f
Factory setting: [OFF]
[MATRIX] Enables/disables matrix (linear matrix/12-axis color correction).
[OFF], [ON]
f
Factory setting: [OFF]
[LINEAR MATRIX] Enables/disables linear matrix.
[OFF], [ON]
f
Factory setting: [OFF]
[COLOR CORRECT] Enables/disables 12-axis color correction.
[OFF], [ON]
f
Factory setting: [OFF]
[PRESET MATRIX] Sets the preset matrix.
[NORM], [EBU], [NTSC]
f
Factory setting: [NORM]
[BLACK SHADING]
Item Description of settings
[CORRECT] Enables/disables black shading (saw-toothed waveform or parabolic waveform) correction.
[OFF], [ON]
f
Factory setting: [ON]
[H SAW R] Adjusts the black shading gain for Rch horizontally using a saw-toothed waveform.
[ − 100]…[ + 100]
f
Factory setting: [0]
[H SAW G] Adjusts the black shading gain for Gch horizontally using a saw-toothed waveform.
[ − 100]…[ + 100]
f
Factory setting: [0]