Panasonic AJHPX2700G - MEMORY CARD CAMERA-RECORDER Скачать руководство пользователя

Страница: 124 / 206

124

Manipulating Clips with Thumbnails: Switching the Thumbnail Display

The display can be switched so that only those clips matching the specified conditions are displayed in the thumbnail screen.

Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.

Press the THUMBNAIL MENU button. The thumbnail
menu appears.

THUMBNAIL MENU button

Select THUMBNAIL from the thumbnail menu. Switch
the thumbnail display by selecting one of the following
items:

ALL CLIP:

Display all clips.

SAME FORMAT CLIPS:

Displays clips of the current system format.

SELECTED CLIPS:

Display randomly selected clips.

MARKED CLIPS:

Display clips with shot marks attached.

TEXT MEMO CLIPS:

Display clips with text memo data attached.

SLOT CLIPS:

Display clips recorded in the P2 card inserted
in the specified slot.
When this item is selected, “SLOT1” to
“SLOT5” are displayed as a sub-menu. Select
the desired slot to display the clips.

SETUP:

Please refer to [Setting the Thumbnail Display
Mode] (page 136) for information about this
item.

EXIT:

Close the sub-menu.

Switching the Thumbnail Display

AJ-HPX2700G-VQT1V27_eng.book 124 ページ２００８年９月２日　火曜日　午後５時４３分

Содержание AJHPX2700G - MEMORY CARD CAMERA-RECORDER















































































































































































































Результаты поиска

Содержание AJHPX2700G - MEMORY CARD CAMERA-RECORDER

Отзывы:

Похожие инструкции для AJHPX2700G - MEMORY CARD CAMERA-RECORDER

Бренды по названию

Популярные бренды

Panasonic AJHPX2700G - MEMORY CARD CAMERA-RECORDER, Руководство по эксплуатации

Результаты поиска

Содержание AJHPX2700G - MEMORY CARD CAMERA-RECORDER

Отзывы:

Похожие инструкции для AJHPX2700G - MEMORY CARD CAMERA-RECORDER

Бренды по названию

Популярные бренды