Panasonic AJ-PX800G, Руководство по эксплуатации

Страница: 142 / 220

– 142 –
Chapter 6 Menu Operations — Menu list
Item Description of settings
[GL PHASE] When in HD (1080i, 720P) mode, selects the output signal of phase to be locked to the signal input to the
<GENLOCK IN> terminal.
[HD SDI]: Locks the HD SDI output signal to genlock input.
[COMPOSITE]: Locks the down-converted composite output signals (signal from the <MON OUT>
terminal and 480i, 576i signals from the <SDI OUT/IN (OP)>terminal) to genlock input.
f
Factory setting: [HD SDI]
[H PHASE] Adjusts the horizontal phase when the phase is to be locked to the signal input to the <GENLOCK IN>
terminal.
[ − 512]…[512]
f
Factory setting: [0]
[SEEK POS SEL] Selects the position to move when the <FF/
)
>/<
%
/REW> button is pressed while playback is paused.
[CLIP]: Top of the clip
[CLIP&TEXT MEMO]: Top of the clip and text memo location
f
Factory setting: [CLIP]
[MENU INITIALIZE] Restores the whole setting menu including all scene files (1 to 6) and user files to the factory settings.
[MAINTENANCE]
These are items for performing maintenance inspection of the camera. This menu is used for updating the firmware version of the camera.
Item Description of settings
[UPDATE] Performs an update of the camera firmware. (Enabled only when there is a dedicated update file on the SD
memory card.)
[LENS ADJ.] [F2.8 ADJ.] Only when this item is set to [ON], sets the iris to F2.8. (Adjusts so that it becomes F2.8 at the lens.)
[ON], [OFF]
f
Factory setting: [OFF]
[F16 ADJ.] Only when this item is set to [ON], sets the iris to F16. (Adjusts so that it becomes F16 at the lens.)
[ON], [OFF]
f
Factory setting: [OFF]
[FB ADJ.] Adjusts the lens flange back.
This can be adjusted only when an auto-focus compatible lens is attached.
[WHITE SHADING] [SHADING SELECT] Sets the white shading data.
[L1:LENS1], [L2:LENS2], [L3:LENS3], [OFF]
f
Factory setting: [OFF]
[NAME EDIT] Edits the title of the white shading data. (Up to six characters)
[EXECUTE] Sets the white shading compensation parameter for the data selected in [SHADING SELECT]. (This
cannot be set if [OFF] is selected).
[CAC ADJ.] [CAC CONTROL] Enables/disables the chromatic aberration compensation function (CAC).
[ON]:
Compensates for chromatic aberration.
[OFF]: Does not compensate for chromatic aberration.
f
Factory setting: [ON]
[LIST/DELETE] Performs such operations as viewing the list of CAC stored in the camera internal memory and deleting
files of the numbers selected from the list of CAC.
[No1]…[No32]
f
Factory setting: [No1]
[DIAGNOSTIC]
This menu is used to display the firmware version, product name, serial number, and operation time of the camera.
Item Description of settings
[VERSION] Displays the information of the camera.
[MODEL NAME]: Displays the product name of the camera.
[SERIAL NO.]: Displays the serial number of the camera.
[MAC ADDRESS]: Displays the MAC address of the camera (Media Access Control address).
[UID]: Displays the unique ID of the camera. Turn the jog dial button (or press the cursor button) to display
the list of each firmware version.
[OPERATION] Displays the operation time of the camera.
[USER MENU SEL]
Configure the items to be displayed in [USER MENU].