Panasonic AJ-PX800G, Руководство по эксплуатации

Страница: 130 / 220

– 130 –
Chapter 6 Menu Operations — Menu list
Item Description of settings
[START TEXT MEMO] Selects whether to automatically add a text memo at recording start position each time recording is started.
[ON], [OFF]
f
Factory setting: [OFF]
[DF MODE] Sets the counting method of the built-in time code generator.
[DF]: Uses the drop frame mode.
[NDF]: Uses the non-drop frame mode.
f
Factory setting: [DF]
[UBG MODE] Selects the user bits mode.
[USER]: Selects the user bits value that has been set.
[TIME]: Selects the local time. (hh, mm, ss)
[DATE]: Selects the local date and time. (YY, MM, DD, hh)
[EXT]: Records the user bits values currently input to the <TC IN/OUT> terminal.
[TCG]: The value of [TCG] is recorded as user bits.
[FRAME RATE]: Selects camera imaging information (such as frame rate).
[REGEN]: Reads the value recorded to the card and continuously records that value.
f
Factory setting: [USER]
[VITC UBG MODE] Selects the VITC user bits mode.
[USER/EXT]: When [UBG MODE] is [EXT], follows the value and when other than [EXT], records the user
value set in [USER].
[TIME]: Selects the local time. (hh, mm, ss)
[DATE]: Selects the local date and time. (YY, MM, DD, hh)
[TCG]: The value of time code generator is recorded as user bits.
[FRAME RATE]: Selects camera imaging information (such as frame rate).
[REGEN]: Reads the value recorded to the card and continuously records that value.
f
Factory setting: [USER/EXT]
[REC META DATA] [LOAD] Loads the metadata upload file saved to the SD memory card.
[RECORD] Sets whether to add loaded metadata at a recording.
[ON]: Adds metadata.
[OFF]: Does not add metadata.
f
Factory setting: [OFF]
[USER CLIP NAME] Sets data to be recorded to [USER CLIP NAME].
(When [RECORD] is [ON])
[TYPE1]: Records setting values of the loaded data.
[TYPE2]: Records the loaded data and counter value.
(When [RECORD] is [OFF])
[TYPE1]: Records the same value as [GLOBAL CLIP ID].
[TYPE2]: Records the same value as [CLIP NAME].
f
Factory setting: [TYPE1]
[CARD SERIAL] Enables/disables the function for storing the text memo with the serial number or the type of card as
metadata.
[ON], [OFF]
f
Factory setting: [OFF]
[INITIALIZE] Deletes all loaded metadata and initializes.
[PROPERTY] Checks and corrects loaded metadata.
[LANGUAGE] Sets the language used to display metadata. (Only when [NTSC(J)] is selected as the region of use)
[ENGLISH], [JAPANESE]
[CLIP]
This item is used to perform various tasks, such as playing back, deleting, copying clips, and editing metadata, while checking the thumbnails of the
clips displayed in the viewfinder.
These menu items are enabled when the thumbnail screen is displayed.
Clip operations such as [DELETE] or [COPY] are enabled when the target thumbnail is selected.
Some items are displayed only in specific situations such as in USB host mode or on the explorer screen.
Item Description of settings
[REPOSITION] Selects a clip to be displayed on the thumbnail screen.
[ALL CLIP]: Displays all clips as thumbnails.
[SAME FORMAT CLIPS]: Displays only the clips recorded in the same format as the system format as
thumbnails. Clips recorded in the same format means that each item of [LINE&FREQ], [REC FORMAT],
and [AUDIO SMPL RES] in the main menu → [SYSTEM MODE] matches the current setting status.
Example) [1080-59.94i/P], [AVC-I100], [24BIT]
[SELECTED CLIPS]: Displays only the clips selected with the cursor buttons as thumbnails. The
thumbnails appear in the selected order.
[MARKED CLIPS]: Displays only the clips with shot marks added as thumbnails.
[TEXT MEMO CLIPS]: Displayed only clips with text memo data attached as thumbnails.
[SLOT CLIPS]: Displays only the clips of the selected slot as thumbnails.
[NG CLIPS]: Displays only the clips with the defective clip indicator in the thumbnail.
f
Factory setting: [ALL CLIP]
[DELETE] Deletes selected clips.
[FORMAT] When the [FORMAT] menu is selected, format the P2 card of the specified slot.
[SLOT 1], [SLOT 2], [SD CARD]
f
When a CPS password is set, you can select [NORMAL] (normal unencrypted format) or
[CPS(ENCRYPT)] (encrypted format).
f
Data deleted as a result of formatting cannot be restored. Always check the data before formatting.