Panasonic AJ-PX5100G, Руководство по эксплуатации

Страница: 61 / 263

– 61 –
Chapter 4 Shooting — Adjusting the white and black balance
Canceling the auto tracking white balance
Press the <USER> buttons (<USER MAIN>/<USER1>/<USER2>) to which the auto tracking white balance function is assigned again, or select the
<WHITE BAL> switch. However, when the auto tracking white balance function is set to <B> of the <WHITE BAL> switch, the function cannot be
canceled with the <USER> buttons (<USER MAIN>/<USER1>/<USER2>).
@ @
NOTE
t This function does not guarantee 100% accuracy for the white balance. Note that the tracking performance relative to changes in ambient lighting and
white balance performance has been given a certain degree of latitude.
Manual setting of color temperature
White balance can be adjusted manually according to the color temperature setting. The manual color temperature setting can be set for each position
of <PRST>, <A> and <B> of the <WHITE BAL> switch.
For the color setting, set [COLOR TEMP PRE], [AWB A TEMP] and [AWB B TEMP] in the main menu
→ [CAMERA] → [WHITE BALANCE MODE].
There are two selections available for color temperature adjustment of [COLOR TEMP PRE], [VAR], and [3.2K/5.6K].
f [VAR]: This can be set from [< 2300K] to [> 15000K].
f [3.2K/5.6K]: This can be set to [3200K] or [5600K].
@ @
NOTE
t Even if color temperature is set manually, the newly adjusted color temperature is recorded to the position of the <WHITE BAL> switch at that time if
white balance is automatically adjusted. The value of the color temperature also changed when the position of the <CC FILTER> dial is switched.
Adjusting the black balance
Black balance must be adjusted in the following instances:
f When the camera is used for the first time
f When the camera has not been used for a long time
f When the ambient temperature has changed considerably
f When super gain is set using the <USER> buttons (<USER MAIN>/<USER1>/<USER2>)
f When [DS.GAIN] is assigned to [USER MAIN], [USER1], [USER2], and [USER5] in the main menu → [CAMERA] → [USER SW]
f When the digital super gain assignment is changed in the main menu → [CAMERA] → [USER SW GAIN] → [DS.GAIN]
To shoot optimum video, we recommend adjusting the black balance immediately before shooting.
a b
a: <AUTO W/B BAL> switch
Use to execute the automatic black balance.
b: <OUTPUT> switch
Set this switch to <CAM>.
1
Set the <AUTO W/B BAL> switch towards <ABB> and then release it.
The switch returns to the central position with the black balance automatically adjusted.
Adjustment is completed in several seconds.
r Message displayed in the viewfinder screen
During adjustment
ABB ACTIVE
Adjustment completed
ABB OK
f The adjusted value is automatically stored in memory.
@ @
NOTE
t Make sure that the lens connector is connected and that the lens aperture is in the close mode.
t During black balance adjustment, the aperture is set to automatically shut out light.
t During recording, black balance cannot be adjusted.