Panasonic AJ-PX5100G, Руководство по эксплуатации

Страница: 195 / 263

– 195 –
Chapter 6 Menu Operations — Menu list
[LENS FILE ADJ.]
Item Description of settings
[LENS FILE ADJ. MODE] Selects the mode to perform lens adjustment.
[ON]: The Rch and Bch gain adjusted in the main menu → [PAINT] → [RB GAIN CONTROL], and the Rch,
Gch, and Bch flare levels adjusted in [RGB BLACK CONTROL] are disabled.
[OFF]: The Rch and Bch gain adjusted in the main menu → [PAINT] → [RB GAIN CONTROL], and the
Rch, Gch, and Bch flare levels adjusted in [RGB BLACK CONTROL] are enabled.
f Factory setting: [OFF]
[LENS R GAIN OFFSET] Corrects the Rch sensitivity of the lens to use.
[ − 200]…[200]
f Factory setting: [0]
[LENS B GAIN OFFSET] Corrects the Bch sensitivity of the lens to use.
[ − 200]…[200]
f Factory setting: [0]
[LENS R FLARE] Adjusts the Rch flare level.
[0]…[100]
[LENS G FLARE] Adjusts the Gch flare level.
[0]…[100]
[LENS B FLARE] Adjusts the Bch flare level.
[0]…[100]
@ @
NOTE
t Data adjusted in [LENS FILE ADJ.] can be saved as a lens file to the SD memory card.
[CAC ADJ.]
Item Description of settings
[CAC CONTROL] Turns chromatic aberration correction (CAC) [ON]/[OFF].
[ON]: Compensates for chromatic aberration.
[OFF]: Does not compensate for chromatic aberration.
f Factory setting: [ON]
[LIST/DELETE] Views the list of CAC FILE stored in the camera internal memory and deletes files of the numbers selected
from the list of CAC FILE.
[No1]…[No32]
f Factory setting: [No1]
[SYSTEM]
These items are used for checking and updating the camera’s firmware version.
Set the system frequency, the number of lines, and recording format.
[SYSTEM MODE]
Item Description of settings
[LINE&FREQ] Sets the system number of lines and frequency, recording format, and audio quantizing bit quantity. When
the number of lines and frequency are selected, only the items that can be selected for those frequencies
are displayed. If the frequency is changed, the device must be restarted. If a restart is required, a
confirmation dialog will be shown.
[1080-59.94P]:
Selects the number of lines 1080P and system frequency 59.94 Hz.
[1080-50P]: Selects the number of lines 1080P and system frequency 50 Hz.
[1080-59.94i]:
Selects the number of lines 1080i and system frequency 59.94 Hz.
[1080-50i]: Selects the number of lines 1080i and system frequency 50 Hz.
[1080-23.98PsF]:
Selects the number of lines 1080P and system frequency 23.98 Hz.
[720-59.94P]: Selects the number of lines 720P and system frequency 59.94 Hz.
[720-50P]:
Selects the number of lines 720P and system frequency 50 Hz.
[480-59.94i]: Selects the number of lines 480i and system frequency 59.94 Hz.
[576-50i]:
Selects the number of lines 576i and system frequency 50 Hz.
f Factory setting: [1080-59.94i]
The setting values are saved together with the settings of [REC FORMAT] and [AUDIO SMPL RES] on
each setting of [LINE&FREQ]. When the settings of [LINE&FREQ] are restored to the previous settings,
these items are reset to the previous settings at the time.