Panasonic AJ-PX5100G, Руководство по эксплуатации, Страница: 144 / 263

– 144 –
Chapter 5 Playback — Thumbnail operations
SD memory card status display
The status display enables confirmation of the SD memory card format condition, available memory space, etc.
Select [SD CARD] in the main menu → [CLIP] → [PROPERTY]. The same information can be displayed in the main menu → [FILE] → [SD CARD
PROPERTY].
[SD STANDARD] Indicates whether an SD memory card is formatted according to the SD/SDHC/SDXC standard.
f [SUPPORTED]: Complies with SD/SDHC/SDXC standards
f [NOT SUPPORTED]: Does not comply with SD/SDHC/SDXC standards
[USED] Used capacity (bytes)
[BLANK] Available space (bytes)
[TOTAL] Total capacity (bytes)
[PROXY REM] Remaining capacity for proxy recording
[NUMBER OF CLIPS] The number of clips on an SD memory card when clips have been copied to an SD memory card
[PROTECT]
Write-protected status
Connecting to external devices using the <USB3.0> terminal (host) (USB storage mode)
You can use an HDD or SSD that can be connected via USB 2.0/USB 3.0. However, there are certain storage devices that cannot be used depending
on the device.
Storage device types and available functions
The available functions differ depending on the storage device you will use. The storage device type is displayed after [PARTITION] on the left side of
the storage device explorer screen.
For details, refer to “Storage device information display (explorer screen)” (page 147).
r Storage device type
Storage device type Features
[TYPE S] A special format to enable fast read/write by card.
[P2STORE]
Indicates P2 STORE (AJ-PCS060G). Writing is disabled.
[FAT]
Storage devices where the primary partition is FAT16 or FAT32. The partition root or CONTENTS folder
under any folders* is the target.
[OTHER]
Indicates other storage devices other than the above. File systems other than FAT16 and FAT32, such as
NTFS.
* The hierarchy of folders is down to the 3rd level and the maximum number of folders is 100. Long file names and file names with double-byte characters are not
supported. Examples of folder displays are shown below.
/CONTENTS Can be displayed.
/SAMPLE/CONTENTS
Can be displayed.
/SAMPLE/20090101/CONTENTS Can be displayed.
/SAMPLE/20090101/1200/CONTENTS Cannot be displayed. (Cannot be displayed since this is a 4th level folder)
r Storage device types and available functions
Available functions
Storage device type
[TYPE S] [P2STORE] [FAT] [OTHER]
Thumbnail display
l l l
—
Card unit
Card*
1
→ Storage l — l —
Card*
2
→ Storage — — — —
Storage → Card*
1
l l — —
Storage → Card*
2
— — — —
Clip unit
Card → Storage l *
4
— l —
Storage → Card l l l —
Playback check*
3
— — — —
Clip image display l l l —
Format
l
—
l l *
5