Panasonic AJ-PX5100G, Руководство по эксплуатации

Страница: 111 / 263

– 111 –
Chapter 4 Shooting — Viewfinder status display
No Display item name
Selection of menu item display/
hide
Display status
Display batch
off*
1
Mode check
display
Display in
playback mode
At all times
Relevant
menu items
only
45
Recording operation status
display
[VF INDICATOR] → [REC
STATUS]
or
[REC/PB SETUP] → [REC
TALLY]
l
—
l
—
l
—
46
Streaming distribution
status display
[VF INDICATOR] →
[STREAMING]
l — l l l —
47 Recording format
[VF INDICATOR] → [REC
FORMAT]
l l
—
l l
—
48 System mode
[VF INDICATOR] →
[SYSTEM MODE]
l l
—
l l
—
*1 Set in the main menu → [VF] → [VF DISPLAY] → [DISP CONDITION].
*2 Warnings and display during changes cannot be turned off.
*3 Warning cannot be turned off.
*4 Partially displayed.
*5 Displays the input information of all four channels.
*6 Not displayed when there is no information.
Mode check display
The camera settings and status can be displayed on the viewfinder screen.
Pushing the <MARKER SEL>/<MODE CHECK/MENU CANCEL> switch on the camera towards the <MCK/MCL> side switches the six screens.
[STATUS] screen display
→ [!LED] screen display → [FUNCTION] screen display → [AUDIO] screen display → [CAC] screen display → [USER SW
STATUS] screen display → no display
Each screen is displayed for approximately five seconds. Pushing the <MARKER SEL>/<MODE CHECK/MENU CANCEL> switch towards the <MCK/
MCL> side while the screen is displayed moves the display to the next screen. [ON]/[OFF] of each screen display can be selected in the main menu
→
[VF] → [MODE CHECK IND]. For details on [STATUS] screen displays, refer to “Checking and displaying shooting status” (page 109).
[!LED] screen
Displays items that are causes of [!LED] lighting.
f [!] is attached to items currently selected at [!LED].
f
!
is attached to items currently targeted for [!LED] lighting.
[GAIN(0dB)] Displays the gain status.
[DS.GAIN] Displays the digital super gain value.
[SHUTTER] Displays the shutter status.
[WHITE PRE.] Displays the white balance status.
[EXTENDER] Displays the extender status by [EX]/[OFF].
[B.GAMMA] Displays the black gamma status by [ON]/[OFF].
[MATRIX] Displays the [MATRIX] status by [A]/[B]/[OFF].
[COLOR COR.] Displays the [COLOR CORRECTION] status by [ON]/[OFF].
[FILTER] Displays the filter status.
[ATW] Displays the status of automatic tracking white balance.
[FUNCTION] screen
Displays the video output status and information of the recording media.
[SDI OUT1] — Displays the status of the signal output from the <SDI OUT1> terminal.
[OUTPUT]
Displays the status of [MEM]/[CAM] or [OFF] set by [SDI OUT1] and [SDI OUT1 MODE] in
the main menu → [I/F SETUP] → [OUTPUT SEL].
[TYPE]
Displays the format of the signal output from the <SDI OUT1> terminal by [HD-SDI]/
[SD-SDI].
[CHAR]
Displays the superimposition status of characters selected in the main menu → [I/F
SETUP] → [OUTPUT SEL] → [SDI OUT1 CHAR] by [ON]/[OFF].
[SDI OUT2] — Displays the status of the signal output from the <SDI OUT2> terminal.
[OUTPUT]
Displays the status of [MEM]/[CAM] or [OFF] set by [SDI OUT2] and [MONITOR OUT
MODE] in the main menu → [I/F SETUP] → [OUTPUT SEL].
[SELECT]
Displays the signal format set by [SDI2/HDMI OUT] and [1080P SDI2/HDMI OUT] in the
main menu → [I/F SETUP] → [OUTPUT SEL] by [SYSTEM]/[DOWNCON]/[1080i].
[CHAR] Displays the position of the <MON OUT CHARACTER> switch by [ON]/[OFF].