Panasonic AJ-PX5000G, Руководство по эксплуатации

Страница: 255 / 260

– 255 –
Chapter 11 Specification — Details of the connector signals
Details of the connector signals
DC IN
1 GND
2 NC
3 NC
4 + 12 V
Panasonic Parts No.: K1AA104H0038
Manufacturer Parts No.: HA16RX-4P (SW1) (76) (Hirose Electric Co.)
@ @ NOTE
t
Make sure that the polarity of the external power supply is correct.
FRONT MIC IN
1 GND
2 L CH IN(H)
3 L CH IN(C)
4 R CH IN(H)
5 R CH IN(C)
Panasonic Parts No.: K1AB105B0002
Manufacturer Parts No.: NC5FBH (NEUTRIK)
AUDIO IN
1 GND
2 AUDIO IN (H)
3 AUDIO IN (C)
Panasonic Parts No.: K1AY103A0001
Manufacturer Parts No.: HA16PRM-3SG (72) (Hirose Electric Co.)
AUDIO OUT
1 GND
2 L CH OUT(H)
3 L CH OUT(C)
4 R CH OUT(H)
5 R CH OUT(C)
Panasonic Parts No.: K1AA105H0016
Manufacturer Parts No.: HA16RD-5P(76) (Hirose Electric Co.)
@ @ NOTE
t
The <AUDIO OUT> terminal on the camera is the XLR terminal and outputs
balanced audio signals. To make unbalanced connection with an external device
using a pin plug, release pins 3 and 5.
The following is a connection example.
L CH
R CH
Pin terminal
Do not use the cable where the pin 3, pin 5 and pin 1 are connected. Doing so may
result in a malfunction.