Panasonic AJ-PX5000G Скачать руководство пользователя страница 190

Страница: 190 / 260

– 190 –

Chapter 7 Menu Operations — Menu list

[SYSTEM]

These items are used for checking and updating the camera’s firmware version.
Set the system frequency, the number of lines, and recording format.

[SYSTEM MODE]

Item

Description of settings

[LINE&FREQ]

Sets the system number of lines and frequency, recording format, and audio quantizing bit quantity. When

the number of lines and frequency are selected, only the items that can be selected for those frequencies

are displayed. If the frequency is changed, the device must be restarted. If a restart is required, a

confirmation dialog will be shown.

[1080-59.94P]:

Selects the number of lines 1080P and system frequency 59.94 Hz.

[1080-50P]:

Selects the number of lines 1080P and system frequency 50 Hz.

[1080-59.94i]:

Selects the number of lines 1080i and system frequency 59.94 Hz.

[1080-50i]:

Selects the number of lines 1080i and system frequency 50 Hz.

[1080-23.98PsF]:

Selects the number of lines 1080P and system frequency 23.98 Hz.

[720-59.94P]:

Selects the number of lines 720P and system frequency 59.94 Hz.

[720-50P]:

Selects the number of lines 720P and system frequency 50 Hz.

[480-59.94i]:

Selects the number of lines 480i and system frequency 59.94 Hz.

[576-50i]:

Selects the number of lines 576i and system frequency 50 Hz.

Factory setting: [1080-59.94i]

The setting values are saved together with the settings of [REC FORMAT] and [AUDIO SMPL RES] on

each setting of [LINE&FREQ]. When the settings of [LINE&FREQ] are restored to the previous settings,

these items are reset to the previous settings at the time.

[REC FORMAT]

Selects the codec for recording and the mode for shooting and recording.

[AVC-I200/60P], [AVC-I200/60i], [AVC-I200/50P], [AVC-I200/50i], [AVC-I200/30PN], [AVC-I200/24PN],
[AVC-I200/25PN], [AVC-I100/60P], [AVC-I100/60i], [AVC-I100/50P], [AVC-I100/50i], [AVC-I100/30PN],
[AVC-I100/24PN], [AVC-I100/25PN], [AVC-I50/60i], [AVC-I50/50P], [AVC-I50/50i], [AVC-G50/60P],
[AVC-G50/60i], [AVC-G50/50P], [AVC-G50/50i], [AVC-G50/30PN], [AVC-G50/24PN], [AVC-G50/25PN],
[AVC-G25/60P], [AVC-G25/60i], [AVC-G25/50P], [AVC-G25/50i], [AVC-G25/30PN], [AVC-G25/24PN],
[AVC-G25/25PN], [AVC-G12/60P], [AVC-G12/60i], [AVC-G12/50P], [AVC-G12/50i], [AVC-G12/30PN],
[AVC-G12/24PN], [AVC-G12/25PN], [DVCPRO HD/60P], [DVCPRO HD/60i], [DVCPRO HD/50P],
[DVCPRO HD/50i], [DVCPRO50/60i], [DVCPRO50/50i], [DVCPRO/60i], [DVCPRO/50i], [DV/60i],
[DV/50i]

The AVC-LongG format cannot be selected in the following cases:

When the main menu

→

[REC/PB]

→

[REC FUNCTION]

→

[RECORDING] is set to [INTERVAL] or [ONE

SHOT].

Types of available codecs vary depending on the setting of [LINE&FREQ]. For details, refer to “Multi

formats” (page 53).

[AUDIO SMPL RES]

If the recording format is AVC-Intra 100/AVC-Intra 50, selects number of the audio recording quantizing

bits.

[16BIT]:

16-bit is the audio recording bit quantity.

[24BIT]:

24-bit is the audio recording bit quantity.

Factory setting: [16BIT]

When the recording format is AVC-LongG 50 or AVC-LongG 25, select [24BIT]. When the recording format

is DVCPRO HD, DVCPRO50, DVCPRO, or DV, select [16BIT].

Clips recorded at 24-bit should be played back using a 24-bit compatible P2 device or P2 Viewer Plus.

The clip numbers of P2 devices that are not 24-bit compatible are displayed in red and cannot be used for

playback. Audio does not play back correctly on a P2 Viewer that is not 24-bit compatible. Always use the

latest P2 Viewer Plus version.

For 24-bit compatible P2 devices and the latest P2 Viewer Plus information, visit the P2 support page on

the following website.

http://pro-av.panasonic.net/

[REC SIGNAL]

Switches the video input signal.

[CAM]:

Records signals from the camera.

[SDI]:

Records input from the <SDI IN> terminal.

Factory setting: [CAM]

Once the power is turned off, it is always set to [CAM] the next time power is turned on.

[ASPECT]

Selects the aspect ratio to record. (Only in SD)

[16:9]:

Records using the 16:9 aspect ratio.

[4:3]:

Records using the 4:3 aspect ratio.

Factory setting: [16:9]

[SCAN REVERSE]

Sets whether to use function to correct video when using an anamorphic lens or film lens.

[ON]:

Corrects video. Inverts the top, bottom, left and right sides of a video.

[OFF]:

Does not correct video.

Factory setting: [OFF]

[COMPRESSION MODE]

Selects how to compress video when recording.

[NORMAL]:

Records in standard compression mode.

[DARK]:

Records by reducing image distortions caused by compression generated in portions of approx.

10IRE (70 mV) or darker.

Factory setting: [NORMAL]

This setting is enabled when recording in DVCPRO HD 720P mode.

Содержание AJ-PX5000G





































































































































































































































































Результаты поиска

Содержание AJ-PX5000G

Отзывы:

Похожие инструкции для AJ-PX5000G

Бренды по названию

Популярные бренды

Panasonic AJ-PX5000G, Руководство по эксплуатации

Результаты поиска

Содержание AJ-PX5000G

Отзывы:

Похожие инструкции для AJ-PX5000G

Бренды по названию

Популярные бренды