Panasonic AJ-PX5000G Скачать руководство пользователя страница 170

Страница: 170 / 260

– 170 –

Chapter 7 Menu Operations — Menu list

Item

Description of settings

[EXCH. THUMBNAIL]

Changes the clip thumbnail to an image with any text memo. This can be executed while the text memo

clip is displayed.

[EXPLORE]

Switches to the information display screen for a storage device or FTP server.

[STORAGE]:

Switches to the information display screen for storage device.

[FTP]:

Switches to the information display screen for FTP server.

[AUTHENTICATE]

When the cursor is placed on the card slot indicated as [AUTH NG CARD] and this menu is selected in the

card status screen, the software keyboard appears to enter the CPS password. If the password is entered

and [OK] is selected, the CPS password is set to the camera.

When the set CPS password is successfully authenticated, the message [AUTHENTICATED

SUCCESSFULLY!] is displayed.

When the set CPS password authentication fails, a warning message (page 247) is displayed.

[CHANGE PARTITION NAME]

Sets and changes the storage partition name in USB storage mode.

The initial value is the date and time that the partition was created.

Valid for type S storage only.

Displayed only in storage explorer.

[DELETE LAST PARTITION]

Deletes the last storage partition when in USB storage mode.

Can only be deleted when the cursor is in the last partition.

Displayed only in storage explorer.

[DELETE FOLDER]

Delete folders in the storage device in the FAT format.

Displayed only in storage explorer.

[THUMBNAIL SETUP]

Item

Description of settings

[INDICATOR]

Selects an item to display and press the <SET> button. Checked items are displayed. When [ALL HIDE] is

selected, other items cannot be selected.

[ALL HIDE]:

Hides all indicators.

[MARKER]:

Displays the shot mark indicator.

[TEXT MEMO]:

Displays the text memo indicator.

[WIDE]:

Displays the wide indicator.

[PROXY]:

Displays the proxy indicator.

Factory setting: [MARKER], [TEXT MEMO], [WIDE], [PROXY]

Defective clip indicator (yellow, red), unknown clip indicator, and incomplete clip indicator are always

displayed, regardless of the settings.

[DATA DISPLAY]

Selects the content to display in the time display area.

[TC]:

Displays the time code.

[UB]:

Displays the user bits.

[TIME]:

Displays the record time.

[DATE]:

Displays the record date.

[DATE TIME]:

Displays the record date and time.

[CLIP NAME]:

Displays clip names.

[USER CLIP NAME]:

Displays a maximum of the first 15 letters (for an English language display) of a user

clip name.

[SLOT]:

Displays slot number.

[THUMBNAIL TC]:

Displays the time code of the thumbnail position.

Factory setting: [TC]

[THUMBNAIL SIZE]

Sets the thumbnail size displayed in a thumbnail on the screen.

[SMALL]:

Small (thumbnail display: with 4

3 and property display)

[MEDIUM]:

Standard (thumbnail display: 4

[LARGE]:

Large (thumbnail display: 3

Factory setting: [MEDIUM]

[PB POSITION]

Sets the playback start position during playback from the thumbnail screen.

[RESUME]:

Plays back from the position where playback stopped.

[THUMBNAIL TC]:

Plays back from the time code of the thumbnail position.

[START TC]:

Plays back from the start time code (beginning of the clip).

Factory setting: [START TC]

Содержание AJ-PX5000G





































































































































































































































































Результаты поиска

Содержание AJ-PX5000G

Отзывы:

Panasonic AJ-PX5000G, Руководство по эксплуатации, Страница: 170 / 260

Результаты поиска

Содержание AJ-PX5000G

Отзывы: