Panasonic AJ-PX270, Руководство по эксплуатации

Страница: 138 / 217

– 138 –
Chapter 6 Menu Operations — Menu list
Item Description of settings
[AGC] Sets the auto gain control operations when [ON] is selected in [A.IRIS].
[ON]: Performs the operation of the [AGC] function that automatically adjusts camera gain when in auto
mode.
[OFF]: Does not perform the operation of the [AGC] function that automatically adjusts camera gain when
in auto mode.
f
Factory setting: [ON]
[AGC LIMIT] Sets the maximum gain value during [AGC] operation.
[3dB], [6dB], [12dB], [18dB]
f
Factory setting: [6dB]
[AGC POINT] Sets the F value to switch control to [AGC] from auto iris during [AGC] operation.
[F4.0], [F5.6]
f
Factory setting: [F4.0]
[A.SHUTTER] Sets the auto shutter control operations when [ON] is selected in [A.IRIS].
[ON]: Performs the operation of auto shutter when in auto mode.
[OFF]: Does not perform the operation of auto shutter when in auto mode.
f
Factory setting: [ON]
[A.SHUTTER LIMIT] Sets the maximum shutter value during [A.SHUTTER] operation.
[1/100], [1/120], [1/250]
f
Factory setting: [1/250]
[A.SHUTTER POINT] Sets the F value to switch control from auto iris to [A.SHUTTER] during [A.SHUTTER] operation.
[F8.0], [F9.6]
f
Factory setting: [F8.0]
[ATW] Sets the operations of the auto tracking white balance function.
[ON]: Activates the auto tracking white balance function when in auto mode. The [ATW] function cannot
be switched between enabled and disabled with the <WHITE BAL> switch or USER buttons. However, if
[ATW LOCK] is assigned to the USER button, the white balance value can be fixed with the USER button.
[OFF]: [ATW] function operation is not performed in auto mode. Performs the operation of the white
balance function selected with the <WHITE BAL> switch.
f
Factory setting: [ON]
[AF] Sets the operation of the auto focus.
[ON]: Performs the operation of auto focus when in auto mode. The <FOCUS> switch does not work.
[OFF]: Does not perform the operation of auto focus when in auto mode. Activates the focus function
selected with the <FOCUS> switch.
f
Factory setting: [ON]
[RECORDING SETUP]
These are various types of setting items when performing camera recording and playback.
Set the system frequency, the number of lines, recording format, and recording method.
Item Description of settings
[REC MEDIA] Selects the slot for the media to be recorded.
[microP2]: Uses microP2 memory cards (slots 1 and 2).
[P2]: Uses P2 memory card (card slot 3).
f
Factory setting: [microP2]
[FILE SPLIT] Selects the split method of the recording file.
[ONE FILE]: The clip is recorded in one file in the AVC-LongG format to a microP2 memory card
(exceeding 32 GB).
[SPLIT]: The clip is split every 4 GB regardless of the recording format.
[SHORT SPLIT]: The clip is split every 128 seconds regardless of the recording format.
f
Factory setting: [SPLIT]
If the clip is recorded in one file, it cannot be copied to a P2 memory card or 32 GB microP2 memory card,
or copied or exported to storage.
When [ONE FILE] is selected, proxy recording is not possible. Also, when the main menu → [RECORDING
SETUP] → [DUAL CODEC SETTING] → [CODEC USAGE] is set to [PROXY REC(P2)] or [PROXY
REC(P2&SD)], [ONE FILE] cannot be selected.
It will be divided to recording files of approximately 128 seconds when [SHORT SPLIT] is selected, but
they can be operated as a single clip when the thumbnail of the clips are operated on the P2 device. A
single continuous recording time is approximately 3.5 hours. [SHORT SPLIT] is disabled in interval, one-
shot, loop, and background recording modes.
[RECORDING] Selects the recording format.
[NORMAL]: Performs standard recording.
[INTERVAL]: Performs interval recording.
[ONE SHOT]: Performs one-shot recording.
[LOOP]: Performs loop recording.
f
Factory setting: [NORMAL]
[RECORDING
SETTING]
[RECORDING HOLD] Selects whether to hold [RECORDING] settings.
[ON]: Holds the settings.
[OFF]: Does not hold the settings. It will always be [NORMAL] the next time when the power is turned on.
f
Factory setting: [OFF]
[ONE SHOT TIME] Sets the recording duration of one-shot recording.
[1frm], [2frm], [4frm], [8frm], [16frm], [1s]
f
Factory setting: [1frm]
[INTERVAL TIME] Sets the interval duration for interval recording.
[2frm], [4frm], [8frm], [16frm], [1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min]
f
Factory setting: [2frm]