– 6 –
Features
High-performance viewfinder
¡
The high-resolution CRT projects a detailed picture which facilitates focus operations.
¡
The viewfinder employs a low flare CRT which makes the screen easy to see.
¡
A center marker which indicates the center of the screen and a safety zone marker which indi-
cates the effective screen region can be displayed by menu operations.
¡
A large aperture allows the screen to be easily seen even when the operator’s eye is removed
from the eyepiece.
¡
The eyepiece can easily be detached. When the eyepiece is detached, the center of the
screen will not become blurred even when viewed from a distance.
¡
One-touch position adjustment is possible not only in the right-left direction but also in the
forward-backward direction.
Character display function
The unit is equipped with a function that displays switch settings, the automatic adjustment sta-
tus for black balance and white balance, warning displays, etc. on the viewfinder screen.
In addition, when using an Anton Bauer Digital Magnum series battery as the unit’s power sup-
ply, the remaining battery level can be displayed numerically on the viewfinder screen.
Warning system for displaying the VTR section status
The unit informs of VTR trouble, the end of the tape, battery wear, etc. with various warning
lamps and a warning tone. The remaining tape time can also be checked by the character dis-
play inside the viewfinder.
Four filter disks as standard equipment
CC (color temperature conversion) and ND (neutral density) filters are provided as standard
equipment. This allows the optimal filter setting to be selected from among four combinations in
accordance with the brightness of the subject.
Fine adjustment of the automatic iris reference value
The reference value for automatic iris adjustment can be finely adjusted by setting menu opera-
tions.
Auto close function
The unit is equipped with an auto close function which automatically closes the lens in the fol-
lowing cases.
¡
When the black balance is automatically adjusted.
¡
When the power is turned off in the auto iris mode.
Generation of SMPTE/SNG color bar and reference audio signals
The camera section contains a circuit which generates an SMPTE type color bar signal to facili-
tate color monitor adjustments, and a circuit which generates a reference level audio signal to
facilitate audio level adjustments.
The unit also contains a circuit for generating SNG color bar signals which come in handy for
sending signals to communication satellites.
Functions and circuits for assuring high picture quality
The AJ-PD900W is equipped with the following functions (and circuits) in order to assure high
picture quality and is designed to make the fullest use of the advantages of the high-perfor-
mance CCD.
¡
A built-in AUTO KNEE circuit achieves a wide dynamic range which allows large signals to
pass through.
¡
A built-in 2-line image enhancer
¡
A built-in shading compensation function for use with a lens extender
¡
A built-in sawtooth wave generator for adjustments
¡
A zebra pattern ON/OFF selector switch which selects three types of zebra patterns including
spot zebra from two levels of zebra patterns.
Audio functions
¡
A phantom power supply type super-cardioid microphone (option) can be attached and it can
also be detached from the main unit for use in interviews.
¡
Microphone can also be connected, and can be attached to the main unit using the
AJ-MH700P microphone holder (option).
¡
The audio CH1 recording level can be easily adjusted at the front panel of the unit.
