28
Introduction: Control Reference Guide
1.
Level meter
Indicates the level of audio signals for CH1, CH2, CH3
and CH4.
The input signal level of audio signals is indicated
during recording and when EE is selected. During
playback the meter indicates output signal levels.
Use the METER selector button to switch the audio
level display to FULL mode or FINE mode. Use the
setup menu No. 776 (REF LEVEL) to change the
reference level.
2.
Counter display
This function shows the counter and time codes.
It displays CTL (relative position from the beginning),
TC (read time code) and UB (user bit of the read time
code).
3.
Format display
Indicates the set record format and the format of video
recorded on an inserted P2 card.
4.
TV system display
Indicates the selected TV system. Use the SYSTEM
setting in setup menu No. 25 (SYSTEM FREQ) to
switch between 59.94 Hz, 50 Hz or other settings.
◆
NOTE:
• When a frequency other than 59.94 Hz and 50 Hz is
selected, also the SYSTEM indicator goes off.
5.
U lamp
In the EE mode, this lamp lights when an input signal
contains UMID information.
Lights during playback when the recording contains
UMID information.
LCD Panel
dB
dB
dB
dB
4
0
-12
-20
-30
-40
3
2
1
0
-1
-2
-3
-4
4
3
2
1
0
-1
-2
-3
-4
L R
L R
L R
L R
HD 50
CTL
TC
UB
-
∞
0
-12
-20
-30
-40
-
∞
DVCPRO AVC-I
SYSTEM
59.9450
1080i720p
U
1
2
5
4
3
dB
4
3
2
1
0
-1
-2
-3
-4
L R
dB
0
-12
-20
-30
-40
L R
FINE mode
FULL mode
Reference level
59.94: Lights when a 59.94 Hz system frequency is selected.
50:
Lights when a 50 Hz system frequency is selected.
