Panasonic AJ-HPM200 Скачать руководство пользователя страница 181

Страница: 181 / 218

Setup: Item Settings

181

tup

This menu is used for menu settings.

•

indicates factory default settings.

883

DIF OUT CH

0000

0063

0064

AUTO

Specifies output channels.

0 - 63: These channels are fixed to assigned values.
64:

This channel is not fixed to assigned values.

When the power is turned off, the output channel is initialized to 63.

886

DIF CONFIG

0000

0001

0255

DFLT

255

Specifies the extension menu.

Normally, DFLT is used.

890

DIF AUD OUT

0000

0001

CH1&2

CH3&4

Specifies the output channels when the audio signals are in 4-channel mode and output

in the DVCPRO (25 Mbps) format and a DV clip is played back.

0: CH1 and CH2

1: CH3 and CH4

Item

Setting

Settings and brief function description

Remarks

No.

SUPER

DISP.

No.

SUPER

DISP.

A00

LOAD

0000

0001

0002

0003

USER2

USER3

USER4

USER5

Specifies user files loaded in USER 1.

0: Loads the contents of USER 2

1: Loads the contents of USER 3

2: Loads the contents of USER 4

3: Loads the contents of USER 5

NOTE:

Pressing the MENU button when loading completes opens a

confirmation dialog. Press the SET button to store the setting. Press

the EXIT button to discard the change and retain the setting.

Setting available

for USER1 only

A01

SAVE

0000

0001

0002

0003

0004

USER2

USER3

USER4

USER5

LOCKED

Specifies the user file that saves USER 1 settings.

0: Saved to USER 2

1: Saved to USER 3

2: Saved to USER 4

3: Saved to USER 5

4: Appears when all user files are write protected.

NOTE:

• A user file in change prohibit status cannot be selected.

• When all user files are in the change prohibit status, “LOCKED”

appears and data cannot be saved.

Setting available

for USER1 only

A02

P.ON LOAD

0000

0001

0002

0003

0004

OFF

USER2

USER3

USER4

USER5

Specifies which user files will be loaded into USER 1 and whether or

not the USER 1 settings should be used in startup when the power is

turned on.

0: Operation is started with the settings of the previously set user file.

1: The content of USER 2 is loaded into USER 1.

2: The content of USER 3 is loaded into USER 1.

3: The content of USER 4 is loaded into USER 1.

4: The content of USER 5 is loaded into USER 1.

Setting available

for USER1 only

Item

Setting

Settings and brief function description

No.

SUPER

DISP.

No.

SUPER

DISP.

59.94Hz

50Hz

only

59.94Hz

50Hz

only

59.94Hz

50Hz

only

Содержание AJ-HPM200



























































































































































































































Результаты поиска

Содержание AJ-HPM200

Отзывы:

Похожие инструкции для AJ-HPM200

Бренды по названию

Популярные бренды

Panasonic AJ-HPM200, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPM200

Отзывы:

Похожие инструкции для AJ-HPM200

Бренды по названию

Популярные бренды