Panasonic AJ-CX4000G, Руководство по эксплуатации

Страница: 95 / 221

– 95 –
Chapter 4 Operation — Menu settings
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[FILTER]
Sets whether to illuminate the [!] lamp on the viewfinder for any setting combination other than the <CC FILTER> dial set to<A> (<3200 K>) and the
<ND FILTER> dial set to <1> (<CLEAR>).
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[ATW]
Sets whether to illuminate the [!] lamp on the viewfinder when the automatic tracking white balance function is working.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[RECORDING] menu
Sets the various items in the recording function.
[FORMAT MEDIA]
Formats the memory card in the specified card slot. Data deleted as a result of formatting cannot be restored. Always confirm the data before formatting.
The items that can be selected are as follows.
f [SLOT1], [SLOT2], [SLOT3]
[CLIP NAME]
[CAM INDEX]
Sets the CAM INDEX used in the name for the MOV format file to be recorded. Set one upper case alphabetical character. This is used as a value to be
stored in the volume label of the memory card.
The items that can be set are as follows.
f [A]…[Z]
(Factory setting: [A])
[NEXT CARD COUNT]
Sets the CARD COUNT used in the name for the MOV format file to be recorded.
In the following cases, the setting value in [NEXT CARD COUNT] is stored in the volume label of the memory card together with the [CAM INDEX]
setting value as CARD COUNT. Also, the setting value will increase one after storing. (It will return to [001] after [999])
f When formatted the memory card
f When recorded to the memory card where CARD COUNT is not stored in the volume label
The items that can be set are as follows.
f [001]…[999]
(Factory setting: [001])
[REC MEDIA]
Selects the memory card to be recorded.
f Recording is not possible when a memory card with the format that is not selected is inserted.
[expressP2] Use the expressP2 card in the card slot 1.
[microP2/SD] Use the microP2 card or the SD card in the card slot 2 or the card slot 3.
(Factory setting: [microP2/SD])
[FILE SPLIT]
Selects the split method of the file in P2 format to be recorded.
[ONE FILE] Record as a single file on the expressP2 card or microP2 card with 32 GB or more.
The recording format is AVC-Intra 422 or AVC-LongG.
[SPLIT] The file is split in 4 GB units regardless of the recording format or the memory card.
(Factory setting: [SPLIT])
@ @
NOTE
t When using a microP2 card with 32 GB or less, it is split every 4 GB regardless of selected item.
t A clip of 4 GB or more recorded by selecting [ONE FILE] cannot be copied to a microP2 card with 32 GB or less.
[2 SLOTS FUNC.]
Sets the recording function that uses card slots 2 and 3.
[OFF] Does not set.