Panasonic AJ-CX4000G, Руководство по эксплуатации

Страница: 68 / 221

– 68 –
Chapter 4 Operation — Menu settings
[R H SAW] Performs the white shading correction manually.
Adjusts sawtooth waveforms and parabolic waveforms of RGB channels in the horizontal and vertical directions.
The items that can be set are as follows.
f [ − 255]…[255]
(Factory setting: [0])
[R H PARA]
[R V SAW]
[R V PARA]
[G H SAW]
[G H PARA]
[G V SAW]
[G V PARA]
[B H SAW]
[B H PARA]
[B V SAW]
[B V PARA]
[CAC ADJ.]
[CAC CONTROL]
Switches [ON]/[OFF] of the chromatic aberration compensation (CAC).
[ON] Performs the chromatic aberration compensation.
[OFF] Does not perform the chromatic aberration compensation.
(Factory setting: [ON])
[LIST/DELETE]
Views the list of CAC file stored in the camera memory or deletes the file with the number selected from the list of the CAC file.
The items that can be selected are as follows.
f [No1]…[No32]
[SCENE FILE] menu
Sets the detailed image quality adjustment of the camera video.
This menu cannot be set when the thumbnail screen is displayed.
For the factory settings, refer to “Factory setting value of the scene file” (page 108).
[FILE SELECT]
Selects the scene file (1 to 6).
The items that can be set are as follows.
f [F1:], [F2:], [F3:], [F4:], [F5:], [F6:]
[NAME EDIT]
Edits the name of the scene file selected in the scene file menu. (Maximum eight characters)
[LOAD/SAVE/INITIALIZE]
Loads/saves/initializes the setting values of the scene file assigned to the current scene file number (any one from 1 to 6).
[LOAD] Loads the scene file saved on the camera memory.
[SAVE] Saves the current setting values as a scene file to the camera memory.
[INITIALIZE] Initializes the selected scene files (1 to 6) to the factory settings.
[SYNC SCAN TYPE]
Switches the synchro scan display settings.
[sec] Displays in time.
[deg] Displays in the shutter open angle.
[SYNC SCAN]
Displays the shutter speed of the synchro scan that is used when shooting video for television, etc.
The items that can be set are as follows.
f When [SYNC SCAN TYPE] is set to [sec] and the [SYSTEM] menu → [FREQUENCY] → [59.94Hz] is set
-
59.94i/59.94p mode: [1/60.0] … [1/7200]
-
29.97p mode: [1/30.0]…[1/7200]
-
23.98p mode: [1/24.0]…[1/7200]
f When [SYNC SCAN TYPE] is set to [sec] and the [SYSTEM] menu → [FREQUENCY] → [50.00Hz] is set
- 50i/50p mode: [1/50.0]…[1/7200]
- 25p mode: [1/25.0]…[1/7200]
f When [SYNC SCAN TYPE] is set to [deg]
- [3.0d]…[360.0d]