Panasonic AJ-CX4000G, Руководство по эксплуатации

Страница: 155 / 221

– 155 –
Chapter 5 Shooting — Convenient shooting functions
Monochrome display
Enables/disables the monochrome display in the [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [BLACK & WHITE].
[ON]: Enables the monochrome display.
[OFF]:
Disables the monochrome display.
[DURING PEAKING]: Enables the monochrome display while the peaking display is enabled.
Highlighting the contours of images
It is easier to focus if the contours of images on the LCD monitor and viewfinder are highlighted.
Highlighting contours does not affect the images output or recorded by the camera.
Highlights the contours of images when set to the [VIDEO OUT/LCD/VF] menu
→ [FOCUS ASSIST] → [DETAIL] → [ON].
Intensity of the contour can be adjusted in the [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [DETAIL] → [DETAIL LEVEL].
Frequency of the contour can be adjusted in the [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [DETAIL] → [DETAIL FREQ.].
@ @
NOTE
t The enlarged display/peaking display/focus square display cannot be recorded.
t The enlarged display/peaking display/focus square display is not displayed while displaying the color bars.
t Some of the displays such as marker will be hidden temporarily during enlarged display/focus square display.
Waveform monitor function
Pressing the USER buttons to which [WFM] is assigned will display the waveform of the image. Press the USER button again to return to the normal
display.
f The waveform and vector displays can be switched by the [VIDEO OUT/LCD/VF] menu → [EI ASSIST] → [WFM MODE]. (page 94)
f The waveform monitor is not displayed during enlarged display or focus square display of the focus assist function.
f The waveform monitor cannot be recorded.
f The waveform monitor is automatically displayed when some of the menus to perform the image quality adjustment are set.