Panasonic AJ-CX4000G, Руководство по эксплуатации

Страница: 103 / 221

– 103 –
Chapter 4 Operation — Menu settings
f When [FREQUENCY] is set to [59.94Hz], and [FILE FORMAT] is set to [MOV]
The items that can be set are as follows.
-
[2160-59.94p/420LongGOP 150M], [2160-59.94p/HEVC LongGOP 200M], [2160-59.94p/HEVC LongGOP 100M], [2160-29.97p/420LongGOP
100M], [2160-29.97p/HEVC LongGOP 150M], [2160-29.97p/422LongGOP 150M], [2160-29.97p/422ALL-I 400M], [2160-23.98p/420LongGOP
100M], [2160-23.98p/HEVC LongGOP 150M], [2160-23.98p/422LongGOP 150M], [2160-23.98p/422ALL-I 400M], [1080-59.94p/422LongGOP
100M], [1080-59.94p/422ALL-I 200M], [1080-59.94i/422LongGOP 50M], [1080-59.94i/422ALL-I 100M], [1080-29.97p/422LongGOP 50M],
[1080-29.97p/422ALL-I 100M], [1080-23.98p/422LongGOP 50M], [1080-23.98p/422ALL-I 100M]
[SHOOTING MODE]
Sets the shooting mode according to the shooting environment.
[NORMAL] Selects the shooting mode for an environment at normal brightness.
[HIGH SENS.] Selects high-sensitivity. Appropriate when shooting in a dark environment. [H.SENS.] is displayed in the camera image
screen.
(Factory setting: [NORMAL])
[OTHERS] menu
Configures the settings for writing/loading/initializing user files to the camera memory and other settings.
[FILE]
Saves and loads the setting data.
For the saving and loading target, refer to “Target items for scene file/setup file/initialization” (page 111).
For details about saving and loading, refer to “Scene file” (page 161).
[SCENE FILE(SD CARD)]
Loads or saves scene files on a memory card.
[LOAD] Selects and loads the scene file saved on the memory card into the camera.
Can select if all of the scene files ([F1:] to [F6:]) are loaded, or individually loaded.
[SAVE] The setting values of the current scene file ([F1:] to [F6:]) are overwritten to the file selected from the list of scene files saved
in the memory card.
[SAVE AS] The setting values of the current scene file ([F1:] to [F6:]) is saved to the memory card as a new scene file by entering the file
name.
[SETUP FILE(SD CARD)]
Loads or saves setup files on a memory card.
[LOAD] Selects the setup file saved on the memory card to load on the camera.
[SAVE] Overwrites the file selected in the list of the setup files saved on the memory card with the current setting values of the
camera.
[SAVE AS] Enter a file name to save the current setting values in the camera as a new setup file in the memory card.
[SETUP FILE(MEMORY)]
Loads or saves the setup files into the camera memory.
[LOAD] Loads setup data saved on the memory.
[SAVE] Saves the setup data to the memory.
[CAC FILE(SD CARD)]
[LOAD] Selects the chromatic aberration compensation data file saved in the memory card and loads it into the camera.
Specifies the file number to save the chromatic aberration compensation data loaded from the memory card with [LOAD] into
the camera.
[DELETE] Selects and deletes the chromatic aberration compensation data file saved in the memory card.
[LENS FILE(SD CARD)]
[LOAD] Selects a lens file saved in the memory card, and loads it as one set of lens files (8-file set) into the camera memory.
[SAVE] Overwrites a file selected from the list of lens files saved in the memory card with the one set of lens files (8-file set) in the
camera memory.
[SAVE AS] One set of lens files (8-file set) in the camera memory is saved in the memory card as a new lens file by entering a file name.
[LENS FILE(MEMORY)]
[LOAD] Selects the lens file saved in the camera memory, loads it, and uses it as current setting value for the operation.
[SAVE] Current setting value is saved in the camera memory as a lens file by specifying the title and the file number.
[CLEAR ALL FILE] Clears and initializes saved values for all the lens files.
[SLOT FOR LOAD/SAVE]
Sets the card slot to load and save the scene file, setup file, CAC file, lens file, and streaming setting file.