Panasonic AJ-CX4000, Руководство по эксплуатации

Страница: 94 / 223

– 94 –
Chapter 4 Operation — Menu settings
[ZEBRA2 DETECT]
Sets the detection level of zebra pattern 2.
The items that can be set are as follows.
f [0%]…[109%]
(Factory setting: [100%])
[ZEBRA2]
Enables/disables zebra pattern 2 and selects [SPOT].
The items that can be set are as follows.
f [ON], [SPOT], [OFF]
(Factory setting: [OFF])
[LOW LIGHT LEVEL]
Sets the amount of the light entering the camera to be the reference to display [LOW LIGHT].
The items that can be set are as follows.
f [OFF], [10%], [15%], [20%], [25%], [30%], [35%]
(Factory setting: [35%])
[WFM MODE]
Sets the display of the waveform monitor. Displaying of the waveform and the vector can be switched.
[WAVE] Displays the waveform.
[VECTOR] Displays the vector.
[WAVE/VECTOR] Displays the waveform and the vector.
The display switches in the order of waveform, vector, and no display every time the USER button assigned with [WFM] is
pressed.
(Factory setting: [WAVE])
[WFM TRANSPARENCE]
Sets the transmittance of the waveform monitor.
The items that can be set are as follows.
f [0%], [25%], [50%]
(Factory setting: [25%])
[!LED]
[GAIN(0dB)]
Sets whether to illuminate the [!] lamp on the viewfinder when the gain is anything other than 0 dB.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[DS.GAIN]
Sets whether to illuminate the [!] lamp on the viewfinder when [DS.GAIN] (incremental gain) is working.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[SHUTTER]
Sets whether to illuminate the [!] lamp on the viewfinder when the electronic shutter is working.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[WHITE PRESET]
Sets whether to illuminate the [!] lamp on the viewfinder when the <WHITE BAL> switch is set to <PRST>.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[EXTENDER]
Sets whether to illuminate the [!] lamp on the viewfinder when the lens extender is working.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[B.GAMMA]
Sets whether to illuminate the [!] lamp on the viewfinder when the black gamma is working.
The items that can be set are as follows.
f [ON], [OFF]