Panasonic AJ-CX4000, Руководство по эксплуатации

Страница: 129 / 223

– 129 –
Chapter 5 Shooting — Assigning function to the USER buttons
Assigning function to the USER buttons
Selected function can be assigned to the USER buttons.
The camera has five USER buttons.
<USER 3> button
<USER 5> button
<USER 4> button
<USER 2> button
<USER 1> button
1
Select the function to assign to each in the [CAMERA] menu → [USER SW] → [USER1] to [USER5].
r Factory settings
USER button Function
<USER 1> button [FOCUS ASSIST]
<USER 2> button [S.GAIN]
<USER 3> button [DS.GAIN]
<USER 4> button [Y GET]
<USER 5> button [WFM]
Selectable functions
Item name Description
[INHIBIT] Disables assignment of functions.
[DRS]
Assigns the dynamic range stretcher function. This function expands the dynamic range by compressing the image level in high-luminosity
areas and stretching the image level in low-luminosity areas.
The compression level can be varied in the [SCENE FILE] menu → [DRS EFFECT DEPTH].
f A slight difference in coloring might occur by enabling/disabling the dynamic range stretcher function.
f When the dynamic range stretcher function is enabled, the knee function or the black gamma function are not activated.
[FBC]* Enables/disables the flash band compensation function.
[S.GAIN]* Assigns the super gain function. Automatic white balance does not function while the super gain function is enabled.
[ATW]* Assigns the auto tracking white balance function.
[ATW LOCK]*
Fixes the white balance value when pressing this item while the auto tracking white balance function is activated. Resumes the auto
tracking white balance function when pressing again.
[Y GET]*
Assigns the function for displaying the luminance level of the image at the position indicated by the square marker displayed near the
center.
[D.ZOOM]* Assigns the digital zoom function. Zooms in on the field angle by 2x, 3x and 4x vertically and horizontally.
[DS.GAIN]*
Assigns the digital super gain function.
f The digital super gain function is activated only during shooting in 59.94p, 59.94i, 50p, and 50i. While the function is activated, the
shutter becomes [OFF].
f Video at the instant that the digital super gain function is enabled/disabled, becomes discontinuous.
[S.IRIS]* Assigns the super iris function. This is enabled when performing backlight compensation.
[I.OVR]*
Assigns the iris override function. To change the target value in auto iris mode, set to this mode and press the jog dial button. Turn the
jog dial button to the left or right to change the target value. [ + ]/[ ++ ]/[ − ]/[ −− ] is displayed on the iris override display area on the viewfinder
screen.
Stop turning the jog dial button at the position to change the target value and press the jog dial button to apply the new target value
setting. The reference value is returned when this mode is canceled or the power is turned off.
[ + ]: Opens aperture by about 0.5.
[ ++ ]: Opens aperture by about 1.
[ − ]: Closes aperture by about 0.5.
[ −− ]: Closes aperture by about 1.
No display: Reference value.
[S.BLK]* Assigns the super black function. This is the function for lowering the black level to the pedestal level or below.
[B.GAMMA]*
Assigns the black gamma function. This function enhances the black tones.
Regardless of the value set by selecting the [SCENE FILE] menu → [LOW SETTING]/[MID SETTING]/[HIGH SETTING] → [BLACK
GAMMA], [BLACK GAMMA]: [6] and [B.GAMMA RANGE]: [3] are set.