Panasonic AIG707WCL1G2, Руководство пользователя

Страница: 39 / 54

4.2 Error Codes and How to Handle Them
4.2 Error Codes and How to Handle Them
4.2.1 About Error Codes
• When an error occurs in the GT series, an error code displays at the top right of the screen.
• There are two types of error codes, GT707 series error codes and PLC error codes.
4.2.2 GT707 Series Error Codes

List of error codes
Code No. Content Cause and solution
**00FF Time up error
The connection between the GT and PLC may not be correct. Check
the wiring of the connection cable and check for disconnection. Also,
there may be a temporary error due to noise, etc. Re-supply power to
the PLC and GT.
**0100
Keyboard screen data
parts digit error
Check if the digit of the data parts on the keyboard screen has been set
correctly.
**0101 Alarm history error
When updating the alarm history display is stopped, alarm history data
displayed on the GT's screen has been updated within the memory.
Once the stop of display update is cancelled, new data is displayed.
**0102
True Type font file
transfer error
Screen data is not transferred correctly. Re-transfer data after deleting
all data.
**0500 Tool setting error
The device that cannot be used is specified for the data. Check if the
used device is correct. (e.g. the word device is set in the bit area.)
**1000
SD memory card not
inserted
An SD memory card is not inserted into the slot properly. Check the SD
memory card slot.
**1001
SD memory card
writing error
Data cannot be written into the SD memory card. Check whether the
SD memory card is not write-protected.
**1002
SD memory card
memory full
Data cannot be written as the memory of the SD memory card has
been exhausted. Delete some data in the SD memory card or prepare a
new SD memory card.
**1003
SD memory card
reading error
The data in the SD memory card cannot be read. Check whether the
saved data in the SD memory card is not damaged with a PC.
**1004
SD memory card data
error
The data loaded from a SD memory card does not match the GT type.
Read the data in the SD memory card with GTWIN, and check whether
it is not damaged.
**1005
SD memory card
saved file name error
The file name to be saved to the SD memory card from the GT is not
specified properly. Specify the file name properly.
4-7