Panasonic AGVP300 - VCR/DVD COMBO, Руководство по эксплуатации, Страница: 29 / 64

29
VC
R
Settings Using the On Screen Display (continued)
Channel Set
The unit tunes automatically after you plug it in and turn it on for
the first time (Plug in Auto Tuning
l
page 15), but you can start the
process again if necessary.
Preparations
≥
Select any program position except “A1” or “A2”.
Operations
While the VCR MENU is displayed
1
Select “CHANNEL SET” by pressing [Cursor]
34
and then press [ENTER].
ª
ANTENNA SYSTEM
2
Select “ANTENNA
SYSTEM” by pressing
[Cursor]
34
and then
press [ENTER].
3
Press [Cursor]
34
to
select “TV” or “CATV” to
suit the type of antenna
you are using.
≥
Channels set corresponding
to the antenna system you
select.
This is set automatically
when you do Plug in Auto
Tuning.
To exit the on screen display
Press [MENU] three times .
ª
Auto Tuning
Auto tuning searches for TV stations from VHF minimum to UHF
maximum and memorizes every tuned program position. Other
program positions are skipped. (Channel plan
l
right)
2
Select “AUTO” by
pressing [Cursor]
34
and then press [ENTER].
Auto tuning starts. It may take
up to three or more minutes to
complete.
To stop partway through
Press [MENU] .
Notes:
≥
When Auto Tuning is completed, the on screen display
disappears and the lowest channel position at which a broadcast
can be tuned in is received.
≥
If you have not set the clock, the unit will carry out Auto Clock
Setting. The time is displayed on the unit’s display when finished.
≥
If the unit is not correctly tuned by Auto Tuning, follow the
procedure on the right column.
ª
Manual Tuning
2
Select “MANUAL” by pressing [Cursor]
34
and
then press [ENTER].
3
Press [Cursor]
34
to
select “CH” and
[Cursor]
2 1
to select the
channel.
4
Press [Cursor]
34
to
select “BLANK” and
[Cursor]
2 1
to select
“ON” or “OFF”.
≥
To select the blanking of a program position, select “ON”.
≥
To restore the channel again, select “OFF”.
≥
Repeat steps 3 and 4 for another unoccupied program
positions to skip during the selection of the program
positions.
To exit the settings screen
Press [MENU] three times.
Channel plan
TV mode
CATV mode
SELECT
END :
:MENU
CATV
ANTENNA SYSTEM
≥
TV
SELECT
END : , ENTER
:MENU
CHANNEL SET
≥
ANTENNA SYSTEM
AUTO
MANUAL
END :MENU
AUTO CHANNEL SET
PROCEEDING
2
CHANNEL
DESIGNATIONS
CHANNEL
RECEIVED OF
THE AIR
CHANNEL
SELECTION &
INDICATION
ON THE UNIT
VHF 2–13 2–13
UHF 14–69 14–69
CHANNEL
DESIGNATIONS
CHANNEL
RECEIVED
FROM CABLE
CHANNEL
SELECTION &
INDICATION
ON THE UNIT
BROADCAST
VHF
2–13 2–13
CATV LOW
BAND
A-5–A-1 95–99
CATV MID/
SUPER
BANDS
A–W 14–36
CATV HYPER
BAND
AA–EEE 37–65
ULTRA
BAND
GGG–WWW
WWW
i
1–
WWW
i
12
66–94
100–125 100–125
SPECIAL CATV
CHANNEL
5A 1
CH 2
MANUAL CHANNEL SET
VP300P.book Page 29 Thursday, March 20, 2003 10:21 AM