Others
113
Problem
Check points
Auto focus function does
not work.
≥
Is manual focus mode selected?
#
Set the AUTO/MANUAL/FOCUS switch to AUTO, or press the
PUSH AUTO button.
≥
Are you trying to record a scene which is hard to bring into focus in
auto focus mode?
#
There are some recording subjects and surroundings for which
the auto focus does not operate correctly. (
118) If so, use the
manual focus mode to adjust the focus. (
Recorded still pictures
are not clear.
≥
Are you trying to record small or finely detailed objects with
[PICT. QUALITY] set at [
]?
#
If you try to record small or finely detailed objects with
[PICT. QUALITY] set at [
], the images may break up into a
mosaic-like pattern. Record with [PICT. QUALITY] set at [
]
instead. (
Sound is not played back
from the built-in speaker
of this unit.
≥
Is the volume too low?
#
The sound volume can be adjusted by moving the MONITOR
LEVEL knob during playback. (
Although this unit is
correctly connected to a
TV, images cannot be
seen.
The images are squeezed
horizontally.
≥
Does the input switch on the TV match the connected terminal?
#
Please read the operating instructions of your TV and select the
channel that matches the input used for the connection.
≥
Is the [TV ASPECT] setting correct?
#
Change the setting to match the aspect ratio of the TV.
Press the MENU button, then select [SETUP]
#
[TV ASPECT]
#
[16:9]
or
[4:3] and press the center of the cursor button.
VQT1Q93_ENG_PP.book 113 ページ 2008年3月6日 木曜日 午後5時42分