66
VQT1F36
Recording
ª
About the white balance sensor
The white balance sensor
A
detects the type of
light source during recording.
Do not cover the white balance sensor during
recording, or it may not function properly.
ª
About the black balance
adjustment
This is one of the 3CCD system functions that
automatically adjusts the black when the white
balance is set in the manual adjustment mode.
When the black balance is adjusted, the screen
will temporarily be black. (The black balance
cannot be adjusted manually.)
1
Black balance adjustment in progress.
(Flashes.)
2
White balance adjustment in progress.
(Flashes.)
3
Adjustment completed. (Lights up.)
≥
When the [
] display flashes, the manual
white balance previously adjusted is stored.
Whenever recording conditions change, re-set
the white balance for correct adjustment.
≥
When setting both the white balance and the
iris/gain, set the white balance first.
Shutter Speed:
Adjust it when recording fast-moving subjects.
Aperture:
Adjust it when the screen is too bright or too
dark.
¬
Rotate the mode dial to select
.
1
Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
The icon shown in the illustration is displayed
automatically.
2
Move the cursor button left or
right to select [
] (aperture) or
[
] (shutter speed).
3
Move the cursor button left or
right to make the adjustment.
A
Shutter speed:
1/60 to 1/8000
≥
The shutter speed closer to 1/8000 is faster.
B
Iris/Gain value:
CLOSE
#
(F16 to F2.0)
#
OPEN
#
(0dB to
18dB)
≥
Value closer to [CLOSE] darken the image.
≥
Value closer to [18dB] brighten the image.
A
1
2
3
Manual shutter speed/aperture
adjustment
VQT1F36_ENG_PP.book 66 ページ ２００７年２月２６日 月曜日 午前１１時２９分
