49
VQT1F36
Recording
≥
If the [PICT. QUALITY] is set to [
],
mosaic-pattern noise may appear on a
playback image depending on the picture
content.
≥
While this unit accesses the SD card (
is
displayed/the card access lamp is lit), do not
perform the following operations. The SD card
or the recorded data may be damaged.
– Turn the unit off.
– Open the card slot cover and remove the SD
card.
– Operate the mode dial.
≥
Other products may degrade or not playback
still pictures recorded on this unit.
≥
The edges of still pictures recorded on this unit
with a 16:9 aspect ratio may be cut at printing.
Check the printer or photo studio before
printing.
ª
About the screen indications
only when the PHOTO SHOT
button is pressed halfway
A
Flash (
B
Flash level (
58)
C
Red eye reduction (
D
Quality of still pictures
E
Size of still pictures
F
Remaining number of still pictures
(Flashes in red when [0] appears.)
G
Card indication (
H
MEGA optical image stabilizer (
ª
About the focus indication
≥
The focus indication indicates the status of the
auto focus.
≥
The focus indication does not appear in manual
focus mode.
≥
Focus on a subject manually when it is not
easily focused automatically.
≥
You can record still pictures on the card even if
the focus indication does not appear, but
pictures may be recorded without being
focused.
≥
The focus indication does not appear or has
difficulty displaying in the following cases.
– When the zoom magnification is high.
– When the unit is shaken.
– When the subject is moving.
– When the subject stands in front of a light
source.
– When close subjects and far subjects are
included in the same scene.
– When the scene is dark.
– When there is a bright part in the scene.
– When the scene is filled with only horizontal
lines.
– When the scene lacks contrast.
– When recording motion pictures
– When the MagicPix function is used.
ª
Concerning the focusing area
When there is a contrasting object ahead or
behind the subject in the focus area, the subject
may not be focused. If so, move the contrasting
object out of the focus area.
≥
Even when it is still difficult to focus, adjust the
focus manually.
≥
The focusing area is not displayed when the
digital zoom (more than approx. 12
k
) is used.
2.1
M
750
750
750
MEGA
A BC D E F G H
VQT1F36_ENG_PP.book 49 ページ 2007年2月26日 月曜日 午前11時29分