Panasonic AG-HMC152EN, Руководство по эксплуатации

Страница: 25 / 112

Preparation
25
Using the LCD
1
Set the POWER switch to ON.
(Page 22)
2
Hold down the OPEN button and open the
LCD monitor.
It can open out to 120°. Do not try to open it
further as this will damage the camera.
OPEN button
3
Position the LCD monitor where it is easiest
to see.
The monitor can be rotated 180° toward the
lens and 90° toward you.
Do not apply unnecessary force to the
open LCD. This can damage the camera.
Ensure the LCD is fully closed.
Operation status displays during self-portrait
recording
No display: Cannot record (no card, etc.)
: Recording in progress, during transition
to the recording pause mode
: Recording paused (recording standby)
: Warning display
•
•
•
•
•
Emphasizing outlines
Emphasizing the outlines of the images you see
in the viewfinder or on the LCD makes it easier to
focus.
Emphasizing the outlines does not effect the
images you shoot.
1
In CAM mode, press EVF DTL button.
“EVF DTL ON” appears on the screen for about
2 seconds.
BARS
LCD
ZEBRA OIS
EVF DTL WFM
CH1 SELECT CH2 SELECT INPUT 1 INPUT 2
SHUTTER
COUNTER RESET/TC SET
AUDIO
SPEED SELECT
INT(L)
INPUT1
INPUT2
INT(R)
INPUT2
ON
MIC POWER +48V
OFF
ON
OFF
EVF DTL button
Press EVF DTL button again to return to the
original display. “EVF DTL OFF” appears on the
screen for about 2 seconds.