16
SQT1045 (ENG)
∫
Attaching the front microphone
≥
The microphone holder is set up so that a 21 mm external microphone (AG-MC200G: optional)
can be attached. Check in advance whether the microphone you wish to use can be attached.
1
Attach the microphone holder to the microphone holder attachment part.
≥
Attach by using a commercially available screw driver.
≥
When attaching the microphone holder, be sure to tighten the screws firmly even though you
might hear a squeaking sound.
2
Attach an external microphone
(optional) to the microphone
holder, and tighten the
microphone holder screw.
3
Connect the external
microphone to the AUDIO
INPUT1 terminal (XLR 3 pin).
≥
When wiring the microphone cable, use
the cable clamper of this unit.
≥
Keep the microphone holder screw,
zoom ring pin and INPUT terminal cap
out of reach of children to prevent
swallowing.
A
Microphone holder attachment part
B
Microphone holder
C
Microphone holder mounting screws
D
AUDIO INPUT1 terminal (XLR 3 pin)
E
Microphone cable clamper
F
Microphone holder screw
G
External microphone (optional)
∫
Attaching the INPUT terminal
cap
Attach the INPUT terminal cap while the AUDIO
INPUT1, 2 terminals (XLR 3 pin) are not used.
∫
Attaching the tripod
≥
There are tripod mounting holes that are
compatible with 1/4-20UNC and 3/8-16UNC
screws. Use the size that matches the
diameter of the tripod’s fixing screw.
≥
Attaching a tripod with a screw length of
5.5 mm or more may damage the unit.
A
INPUT terminal cap
A
Tripod receptacle