Panasonic AG-DVX100BE Скачать руководство пользователя

Страница: 51 / 88

E-50

ENGLISH

This function enables you to change the playback
speed and search for specific scenes.

During playback, move the OPERATION lever

On the remote control, press the VAR.
SEARCH button.

[1x] appears on the screen and the tape is
played back at the normal speed.
No sound is heard at this time.

Press the AUDIO MON/VAR button to change
the playback speed.
On the remote control, press the [

] or [

]

SET button.
• Each time you press the button, the speed

changes as follows; 1/5 (1/3 in LP mode)
speed, 1x speed, 2x speed, 5x speed,
10x speed, 20x speed.

• Press the “+” button to increase the speed

and the “-” button to decrease the speed.

• Move the OPERATION

to return to normal

playback.

You can find unrecorded parts or the end of the last
scene shot.

In the setup menus, OTHER FUNCTIONS
screen, END SEARCH, set the search method.
(Page 76)

BLANK:

Find unrecorded parts.

REC END:

Find the end of the last scene shot.

Press the EVF DTL/END SEARCH button in
the VCR mode.
• The unrecorded parts are found, and a still

picture that is about a second ahead is
displayed.

When in the camera mode, press and hold the
EVF DTL/END SEARCH button for at least a
second.
• A blank portion of the tape is found, and a still

picture that is about a second ahead is
displayed while the camera is in recording
standby mode.

• If you change the tapes, the camera will not be

able to find the end of the last scene shot even if
you have set REC END.

• If the tape is blank, searching stops at the end of

the tape.

• This function may not work properly if there are

blank parts near the beginning of the tape or part
way through the tape.

• Before recording, check the still picture first.

Variable speed search

INDEX

SELECT

STORE

OFF/ON

P.B.DIGITAL

VAR.

PB.

ZOOM

SET

ITEM

STOP

INDEX

Camera

or remote control

AUDIO MON/VAR button

INDEX

SELECT

STORE

OFF/ON

P.B.DIGITAL

VAR.

PB.

ZOOM

SET

ITEM

STOP

INDEX

Camera

remote control

End search

EVF DTL/END SEARCH works differently when
simply pressed in camera mode. (Page 23)

EVF DTL/
END SEARCH button

ack

AG-DVX100B_EN.book 50 ページ２００５年１０月５日　水曜日　午前１０時５２分

Содержание AG-DVX100BE

























































































Результаты поиска

Содержание AG-DVX100BE

Отзывы:

Похожие инструкции для AG-DVX100BE

Бренды по названию

Популярные бренды

Panasonic AG-DVX100BE, Руководство по эксплуатации

Результаты поиска

Содержание AG-DVX100BE

Отзывы:

Похожие инструкции для AG-DVX100BE

Бренды по названию

Популярные бренды