Panasonic AG-CX350, Руководство по эксплуатации

Страница: 82 / 216

– 82 –
Chapter 4 Operation — Menu settings
By compressing the video signal levels of the high luminosity areas that are blown out in normal shooting, the dynamic range can be expanded.
The items that can be set are as follows.
f [1]…[3]
@ @
NOTE
t This cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[DNR]
Changes the noise reduction setting and adjusts the noise reduction effect.
The items that can be set are as follows.
f [OFF], [1], [2]
[A.IRIS LEVEL]
Enables/disables the auto iris level function.
If functions are assigned to the USER buttons, [ON]/[OFF] can be switched using the USER button operations.
The items that can be set are as follows.
f [ON], [OFF]
[A.IRIS LEVEL EFFECT]
Adjusts the brightness in the auto iris mode.
Increase the value to brighten, and decrease the value to darken the convergence of auto iris.
The items that can be set are as follows.
f [ − 50]…[50]
[AUDIO] menu
Sets the input/output function of audio.
[INPUT SETTINGS]
[INPUT1 MIC LEVEL]
Sets the input level of the external microphone connected to the <AUDIO INPUT 1> terminal. Enabled when the external microphone is connected and
the <INPUT1> switch is set to <MIC> or <
+ 48V>.
The items that can be set are as follows.
f [ − 40dB], [ − 50dB], [ − 60dB]
(Factory setting: [ − 50dB])
[INPUT2 MIC LEVEL]
Sets the input level of the external microphone connected to the <AUDIO INPUT 2> terminal. Enabled when the external microphone is connected and
the <INPUT2> switch is set to <MIC> or <
+ 48V>.
The items that can be set are as follows.
f [ − 40dB], [ − 50dB], [ − 60dB]
(Factory setting: [ − 50dB])
[INPUT1 LINE LEVEL]
Sets the audio input level of the audio device connected to the <AUDIO INPUT 1> terminal. Enabled when the audio device is connected and the
<INPUT1> switch is set to <LINE>.
The items that can be set are as follows.
f [4dB], [0dB]
(Factory setting: [0dB])
[INPUT2 LINE LEVEL]
Sets the audio input level of the audio device connected to the <AUDIO INPUT 2> terminal. Enabled when the audio device is connected and the
<INPUT2> switch is set to <LINE>.
The items that can be set are as follows.
f [4dB], [0dB]
(Factory setting: [0dB])
[REC CH SETTINGS]
[CH1 LEVEL]
Sets if the recording level adjustment method for audio channel 1 is to be automatic or manual.
If [AUDIO CH1 LEVEL] is assigned to the USER button, pressing the USER button switches [AUTO]/[MANUAL].
The items that can be set are as follows.
f [AUTO], [MANUAL]
(Factory setting: [AUTO])
[CH2 LEVEL]
Sets if the recording level adjustment method for audio channel 2 is to be automatic or manual.