- 107 -
If you set this item to [ON], you can compensate for and reduce flash band, a phenomenon that
creates markedly different levels of luminance between the top and bottom of the image when
recording is performed in an environment where another camera is firing its flash. (
≥
This function’s default setting is [OFF].
You can control the noise reduction effect and afterimage intensity by adjusting the noise reduction
setting.
1
Touch [NR CONTROL].
2
Touch
/
to adjust settings.
≥
You can select a value between
s
5 and
r
5.
≥
Adjusting the setting in the minus (
s
) direction weakens the noise reduction effect, thereby
reducing afterimages. Note that this also tends to increase noise.
≥
Adjusting the setting in the plus (
r
) direction enhances the noise reduction effect, thereby
reducing noise. Note that this may also cause afterimages to appear more frequently.
3
Touch [EXIT] to exit the menu screen.
≥
The default setting is 0.
System mode
All default settings are indicated with underlined text.
Switch the recording mode of the motion pictures to record.
* It is not compatible with motion pictures recorded in AVCHD.
≥
This item cannot be set during Freeze Frame. (
[FLASH BAND COMPENSATION]
[ON]/[OFF]
[NR CONTROL]
: [SYSTEM MODE]
#
desired setting
[REC MODE]
[MOV]*:
This recording method is suitable for editing images. Motion pictures will
be saved in MOV format.
[MP4]*:
This recording method is suitable for editing images. Motion pictures will
be saved in MP4 format.
[AVCHD]:
This recording method is suitable for playback on a high-definition
compatible TV.
MENU
R68S3_PJPB.book 107 ページ 2016年5月18日 水曜日 午後10時32分