Panametrics Sentinel LCT, Руководство пользователя

Страница: 55 / 248

Sentinel LNG User’s Manual 43
Chapter 3. General Programming
3.6 Channel Programming
3.6.1 Activating a Channel/Path/CHX (Status)
Use the Status submenu of the PROG menu, to activate or deactivate a channel/path. The channel/path should be
activated when the unit is received, however, it should be verified that the channel/path is active before data is
acquired. While following the programming instructions, refer to Figure 231 on page 212. Remember to record all
programmed data in Appendix C, Data Records.
To access the Status submenu:
1. Press [ESC] . The Sentinel LNG enters the User Program.
2. Press the [u] key until PROG is bracketed in the top left corner and press [ENT] .
3. Use the [p] and [q] keys to scroll to the desired channel and press [ENT] . The screen appears similar to Figure 34
below.
Figure 34: The PROG Menu
4. Press [ENT] to open the Status submenu.
Figure 35: The Status Menu
5. The screen offers two options, ON and OFF. Use the [p] and [q] keys to scroll to the desired selection and press
[ENT] .
Note: On any menu, if you scroll to a different option, press [ENT] twice to select it (once to enter and again to
confirm).
6. Press [ESC] (or [ENT] twice if you have selected the other option) to return to the channel menu.
After the above steps are completed, the user program returns to the PROG menu. Do one of the following:
•
To program in other menus, refer to Appendix A, Menu Maps , to navigate to the desired menu.
• To leave the User Program, press [ESC] three times.