Panametrics DigitalFlow XGF868i, Руководство для стартапов

Страница: 42 / 90

Chapter 2. Initial Setup
32 DigitalFlow™ XGF868i Startup Guide
2.6 Entering System Data for the Channel
The
Channelx-System
submenu is used to enter system parameters for the channel.
2.6.1 Accessing the Channelx-System Submenu
1. From the
Channel PROGRAM
menu, scroll to
SYSTM
and press
[Enter]
.
2. The first prompt asks for the Channel Label. Use the four scrolling keys to enter the desired label (in any numeric
or text combination up to five characters), and press
[Enter]
.
3. The next prompt asks for the Channel (Site) Message . Enter the desired text in the same manner as the channel
label with up to 15 characters, and press
[Enter]
.
2.6.2 Selecting Volumetric Units
1. Scroll to the desired Volumetric Units for the flow rate display and press
[Enter]
. The available units are listed in
Table 7 below.
2. Scroll to the desired Volumetric Time units for the flow rate display (from seconds to days) and press
[Enter]
.
3. Scroll to the desired number of Vol Decimal Digits (digits to the right of the decimal point in the volumetric flow
rate display) and press
[Enter].
2.6.3 Selecting Totalizer Units
1. Scroll to the desired Totalizer Units for the totalized flow rate display and press
[Enter].
Available units are listed in
Table 7 above.
2. Scroll to the desired number of Tot Decimal Digits (digits to the right of the decimal point in the totalized flow rate
display) and press
[Enter].
3. Do one of the following:
• If MASS FLOW is ON, proceed to Selecting Mass Flow Units on page 33 .
• If MASS FLOW is OFF, the meter returns to the Channel PROGRAM window. Proceed to Entering Transducer and
Pipe Parameters on page 33 .
Note: To activate mass flow, see Activating Mass Flow in Chapter 1 of the Programming Manual .
Table 7: Available Volumetric/Totalizer Units
English Metric
ACF = Actual Cubic Feet ACM = Actual Cubic Meters
KACF = Thousands of ACF KACM = Thousands of ACM
MMACF = Millions of ACF MMACM = Millions of ACM
SCF = Standard Cubic Feet SCM = Standard Cubic Meters
KSCF = Thousands of SCF KSCM = Thousands of SCM
MMSCF = Millions of SCF MMSCM = Millions of SCM