Panametrics DigitalFlow XGF868i, Руководство по обслуживанию

Страница: 58 / 72

Appendix B. Calibration and Testing with PanaView
50 DigitalFlow™ XGF868i Service Manual
B.5.3.3 RAM Test
To check the RAM:
Note: If you are in the Hardware Test option, skip to step 2.
1. From the left pane of the Calibration/Test window, double-click on Hardware Test .
2. In the center pane, double-click on RAM TEST .
3. The right pane displays the RAM Value, along with an indication as to whether the RAM is functioning. Click [Next
Item] or [Exit Page] to return to the Hardware Test option, and [Exit Page] again to return to the main Calibration/Test
menu.
B.5.3.4 FIFO Test
To check the FIFO:
Note: If you are in the Hardware Test option, skip to step 2.
1. From the left pane of the Calibration/Test window, double-click on Hardware Test .
2. In the center pane, double-click on FIFO TEST .
3. In the right pane, a message lists the desired number of bits, along with the approximate bias and the average
sample. Click [Next Item] to perform the test and return to the Hardware Test option, and [Exit Page] again to return
to the main Calibration/Test menu.
B.5.3.5 LCD Test
To test the LCD:
Note: If you are in the Hardware Test option, skip to step 2.
1. From the left pane of the Calibration/Test window, double-click on Hardware Test .
2. In the center pane, double-click on LCD TEST .
3. The LCD display flashes three times, while a message in the PanaView right pane displays the test values. Click
[Next Item] or [Exit Page] to return to the Hardware Test option, and [Exit Page] again to return to the main Calibra -
tion/Test menu.