Panametrics CGA 351, Руководство пользователя, Страница: 65 / 119

CGA 351 User’s Manual 59
Chapter 4.
4.1.13 Setup and Security Settings
After entering the
User Program, access the
[Opt] submenu to perform the following operations:
• setting up the option card slots
• setting the security levels
Proceed to the appropriate section for specific instructions on the topic of interest.
4.1.13.1 Setting Up the Option Card Slots
To set up the option card slots, enter the
User Program as described on page 27 and proceed as follows:
Note: The [Lock All] and [Versions] options also appear in the above list box.
At the following prompt, an option card may be added or removed in an expansion slot, or options may be added or
removed in the main (slot 0) position.
Note: The
[Erase Main]
option is also available in the above list box.
Table 106:
Cfg Cal Opt Disp Use the [

] and [

] keys to
select [Opt] and press
[ENTER] .
POWER ESC ENTER
Table 107:
Cfg Cal Opt Disp Use the [

] and [

] keys to
select [Setup] and press
[ENTER] .
User
Setup
Lock Menus
POWER ESC ENTER
Table 108:
Setup Use the [

] and [

] keys to
select the desired action and
press [ENTER] .
Load Slot
Load Main
Erase Slot
POWER ESC ENTER