Panametrics Aurora H2O, Руководство пользователя

Страница: 85 / 170

Chapter 4. Programming Advanced Features
20 Aurora H2O User’s Manual
4.6.4 Editing Pressure Calibration (cont.)
To edit the Input Value , use the up and down arrow keys to select Edit Input Value and press
Enter . The following screen appears.
Use the left and right arrow keys to select each digit to be changed. Use the up and
down arrow keys to change the value. When finished, press Enter . The screen returns to
the previous menu.
4.7Regional Settings
This section enables the setting of regional information, depending on the location of the Aurora H2O .
To reset the regional settings, from the Settings Menu , select Locale... and press Enter . The
following screen appears.
Note:
Locale settings for your order have been set at the factory and are access code
protected. If you determine a need to access Regional Settings , contact the factory for
assistance.
4.7.1 Setting the Country Code
To edit the country code, from the Regional Settings Menu select Country Code and press
Enter . The following screen appears. A passcode is required to make changes.
Use the left and right arrow keys to select each digit to be changed. Use the up and
down arrow keys to change the value. When finished, press Enter . The screen returns
to the
Regional Settings Menu
.
• Country Codes = international telephone country codes.
• Default = 1 for U.S.
• Option = 81 for Japan is available to conform to METI requirements.