manualshive.com logo in svg

Pan Acoustics PAN NET, Руководство пользователя, Страница: 7 / 14

Поделиться
Скачать
Pan Acoustics PAN NET Скачать руководство пользователя страница 7

© Pan Acoustics GmbH   

     

Page 7 of 14       

Manual 

                                                                                                

Doc. Nr

.: 01684.V1 - 12.2022 [tr

anslation based on German v

ersion]

Description

Quantity

DANTE INTERFACE - PAN NET

1

3. Scope of delivery

4. 

Defi nitions

Pan Net

 

Audio and control signals are transmitted via the Pan Net by means of a (twisted-pair) network

 

cable. The cable must be category CAT 5e or higher. The cabling is confi gured in a daisy chain. 

„Pan Beam Setup“ software

 

Software for the setup of Pan Beam speakers

RJ45

 

Plug connector for transmitting signals

AES/EBU

 

Interface for transmission of digital audio signals between various devices according to AES3

Dante

 

Digital audio network protocol for transmission of audio and control data developed by Audinate Pty Ltd. 

Dante Controller

 

Software for setting up and monitoring the Dante audio network

5. Product description

NOTICE

AES/EBU stubs and the output on the last unit must be terminated.

The DANTE INTERFACE - PAN NET is an audio network bridge for integrating Pan Beam speakers with an 

AES/EBU input into a Dante audio network. The Pan Beam speakers can be confi gured and monitored 

from a PC with installed “Pan Beam Setup” software which is located in the same IP network. The Dante 

Controller software is required for setting up the interface. It can be obtained from www.audinate.com. 

The Pan Net Interface consists of a high-quality aluminum enclosure, providing two Dante ports (primary 

and secondary), as well as a Pan Net port. Via the Dante Interface, the connected Pan Beam speakers 

can be supplied with two digital audio signals (AES/EBU). The DANTE INTERFACE - PAN NET can be run 

both in daisy chain mode as well as in redundant mode. It supports sampling rates of 44.1 to 96 kHz.

  

The interface is also available in a weather-protected version for top hat rail mounting.

Содержание PAN NET















Отзывы:

Нет отзывов