© Pan Acoustics GmbH
Page 4 of 14
Manual
Doc. Nr
.: 01684.V1 - 12.2022 [tr
anslation based on German v
ersion]
1. Introduction
Thank you for choosing a Pan Acoustics product.
With the purchase of the DANTE INTERFACE - PAN NET, you have acquired an accessory for Pan
Acoustics active loudspeakers. With this interface you can integrate loudspeakers with AES/EBU
interface into an already existing Dante network. An external power supply unit is required to ope-
rate the interface. This must be purchased separately with the appropriate country specifi cations.
Please read these operating instructions carefully before commissioning to ensure trouble-free ope-
ration.
1.1. Symbols and explanation
All information in these operating instructions is based on the product characteristics available at the
time of writing and the safety regulations applicable at that time.
These operating instructions describe the setup, function and connection of the DANTE INTERFACE
- PAN NET. They are intended for system technicians and persons responsible for installation and
operation.
Technical specifi cations as well as dimensions, weight and properties do not constitute guaranteed
characteristics. Pan Acoustics reserves the right to make changes and modifi cations within the scope
of legal regulations and product improvements without notice.
These operating instructions and all other information necessary for operation must be read before
use by all persons involved in the operation of the equipment. The operating instructions and other
necessary information must be kept within easy reach near the unit.
The original language of all Pan Acoustics operating instructions is German.
All necessary information and documents can be obtained from the Pan Acoustics Internet Page
https://www.pan-acoustics.de/en/service/download
or by sending an e-mail to
contact@
pan-acoustics.de
.
1.2. General information and target group
This symbol provides important instructions for proper handling of the
product. Failure to observe this instruction may lead to damage to the
product or malfunctions.
This symbol indicates a hazard with a high level of risk. If this hazard is not
prevented, severe injuries or death may result.
This symbol indicates a hazard with a moderate level of risk. If this hazard is
not prevented, moderate to severe injuries or death may result.
This symbol indicates a hazard with a moderate level of risk. Failure to
observe this instruction may lead to minor injuries or property damage.
NOTICE
CAUTION
WARNING
DANGER