Remote Controller Preparation
Others
1. Open the cover.
2. Insert batteries (R03).
Make sure to match the "+" and "-" of the batteries with
the marks inside the battery compartment.
3. Close the cover.
Notes:
Improper use of batteries may cause battery leakage and
corrosion. To operate the remote controller correctly, follow
the instruction below.
Do not insert batteries into the remote controller in the
wrong direction.
Do not throw batteries into a fire.
controller.
Do not charge, heat, open, or short-circuit the batteries.
Do not leave dead or exhausted batteries in the remote
Do not use different types of batteries together or mix old
lf you do not use the remote controller for along
and new batteries.
period of time remove the batteries to avoid possible
damage from battery corrosion.
If the remote controller does not function correctly or the
operating range become reduced, replace all batteries
with new ones.
If battery leakage occurs, wipe the battery liquid from the
battery compartment, then insert new ones.
Point the remote controller at the remote sensor and press
the button.
(The pictures of player and remoter are only for reference)
Distance: About 7m from the front of the remote sensor.
Angle: About an angle of 30 in each direction of the front
Remarks: Do not expose the remote sensor of the DVD
player to strong light source such as direct sunlight or
other illumination. If you do so, you may not be able to
operate the DVD player via the remote controller.
of the remote sensor.
Notes:
Direct the remote controller at the remote sensor of the
DVD player.
Do not drop or give the remote controller a shock.
Do not leave the remote controller near an extremely
hot or humid place.
Do not spill water or put anything wet on the remote
controller.
Do not open the remote controller.
If the remote controller function correctly, the usage life
of the battery is about one year.
-36-
3
2
1
Install the batteries into the remote
controller to operate the DVD player.
Operate with the remote controller
correctly.
