Getting Started | Filling Reservoir with water
18.
Indoor Hydroponic Grow Cabinet | Installation and operation Guide Rev A | Doc P/N: 460966-8080
www
Perform the following steps to
treat the water and fill the reservoir:
6.5 FILLING RESERVOIR WITH WATER
Fill a bucket with
water treated by
reverse osmosis
CAUTION:
Follow manufacturers'
instructions prior to using pHDown,fertilizer,
and the pH and EC meters
TIP:
Water treated by reverse osmosis
removes many of the minerals that impair
plant growth. Using untreated water may
require additional analysis to achieve the ideal
growing conditions, depending on water source
NOTE:
The water reservoir can hold
20 liters of water
Add pHDown
and stir until
the pH meter
displays 6.5-7
Verify the pump
is switched off
CAUTION:
Exceeding MAX on the water
gauge will cause the water to overflow and spill
onto the floor
Pour the water
into the reservoir,
repeating steps 2
and 3 until MAX
level is reached
1
2
3
4
